Products results

Carbon black is the main pigment used in Polyester 901.

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance.

Neoplast™ 135 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

A soft, colorable SBS based thermoplastic elastomer (TPE) compound designed for injection molding applications.

A soft, black SBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PS.

MoldX® A400 is a third generation optimized Alumina Trihydrate (ATH) product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.MoldX® A400 optimized ATH is particularly well-suited for SMC, and it can also provide low cost flame retardancy and smoke suppression in other thermoset processes such as: epoxy potting, wet-mat, spray-up, hand lay-up, and bulk molding compounds (BMC) that contain reinforcing fibers (patent pending).

A hard, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance.

A soft, colorable SBS based thermoplastic elastomer (TPE) compound designed for general purpose applications.

INDRA AGRO-TECH INDRA AC PRINT18/B is a Non-Ionic Crosslinked Polygalactomannan. INDRA AC PRINT 18/B is a cold water soluble derivative.

Kezadol PCI is a surface treated calcium oxide powder for use as an effective desiccant. The calcium ox-ide is coated by a chemically indifferent hydrocarbon. Due to this preparation Kezadol PCI has a reduced air pollution. Additionally there will not be any unintended reaction with humidity.

Quinacridone is the main pigment used in Nylon 404.

Astra Polymers White-MB is used under automotive, consumers, packaging, electrical, appliances, construction, agriculture.

Carbon black is the main pigment used in Nylon 901.

Astra Polymers Color-MB/Green is used under automotive, consumers, packaging, electrical, appliances, construction, agriculture.

A soft, black SBS based thermoplastic elastomer (TPE) compound designed for injection molding applications.

Calcined metal complex is the main pigment used in Nylon 103.

A hard, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for low coefficient of friction requirements.

Neoplast™ 180 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

FlameGard™ is a ground Bayer hydrated alumina designed for specific application in polymeric adhesive backing of tufted carpeting to provide a level of flame retardancy to the carpet system. It is specially ground to maintain relatively coarse particle distributions in the median range of 22 to 26 microns and provides a high loading potential in high viscosity backing compounds. FlameGard ATH has a slight off-white or ivory color that is acceptable in most applications.

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance.

Shenzhen Xinghua Pigment Masterbatch Solvent Blue 97 is blue colored anthraquinone dye. It provides high heat resistance, very good migration fastness and excellent light fastness. This grade is recommended for use in PS, SAN, hard PVC, AS, ABS, PMMA, PET, PBT, PC and PA 6. Solvent Blue 97 can be used in PA 66.

Arlatex 1372R is an aqueous dispersion of a carboxylated styrene-butadiene copolymer manufactured by polymerization in emulsion. The type of emulsifier is anionic and it is stabilized with a non-staining antioxidant.

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.

Tensorgrip® 53 High Strength Spray Contact Adhesive is an all-round general purpose contact adhesive that performs many standard adhesive applications. These include bonding rubber, veneer, foam, fabric, most plastics, cool duct insulation, acrylic, leather and fiberglass. TensorGrip® 53 is compliant with stringent Californian VOC regulations and is therefore guaranteed to be safe for your workplace and customers. Tensorgrip® 53 has two special features: TensorGrip® 53 is resistant to solvent based lacquers used in the veneer coating process, and it bonds difficult rubber substrates such as EPDM.

A soft, black SBS based thermoplastic elastomer (TPE) compound designed for injection molding applications.

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance.

AIPLUS PP is a new flame retardant masterbatch for PP, with higher performance than the traditional flame retardants of the same UL 94 V2 class.

DWMID PA 66 FV50% Polyamide reinforced with 50% glass fiber, with good fluidity for injection molding of manufactured articles require very high stiffness.

Nano4 Bio EC 12 is an electrically conductive thermoplastic compound based on bio-polyethylene.

Perylene is the main pigment used in Polyester 305.

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance.

BayGranite™ is an inorganic hydrated alumina designed for use in polymer systems as a flame retardant and smoke supressive additive. BayGranite® 17 is more accurately designated chemically as aluminum trihydroxide, Al(OH)3, and is produced through processing of alumina-bearing feedstocks. Although BayGranite® 17 is a dry powder, when heated above approximately 220°C it decomposes into approximately 35% water and 65% alumina by weight. BayGranite®17 is a nonabrasive, low density material with a Mohs hardness index of 2.5 - 3.5 and a specific gravity of 2.42. Almatis BayGranite®17 ATH is compatible with polymer systems, and is designed for applications that require low-soda ATH products.

Safron® H510 - 02 polypropylene resin is suitable for extrusion, general purpose injection and blow molding. It offers good processability and low water carry-over, as required when water baths are used during processing. Safron® H510-02 Polypropylene Resin offers good tenacity and low fibrillation.

A hard, colorable unfilled SBS based thermoplastic elastomer (TPE) compound designed for injection molding applications.

PETOPLEN EH102 is a medium flow, homopolymer polypropylene resin with medium molecular weight distribution. The material is developed for general purpose injection molding and fiber production for textile applications.