Products results

Perlast® G75S has been specifically developed to cope with a wide range of process media, potent active pharmaceutical ingredients (API's) and aggressive cleaning agents, being especially suited to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels. G75S is also suitable for other critical applications such as Water-For-Injection (WFI) systems.Perlast® G75S is an all round material that can be used for all types of applications requiring FDA and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Unlike other FDA compliant elastomers, Perlast® G75S is thermally stable at higher temperatures, and is ideal for use in applications which require exposure to temperatures up to 310°C (590°F) making it suitable for use in Stage II Sterilization processes.Perlast® G75S is suitable for both dynamic and static applications and can be molded into O-rings and custom shapes.Key Attributes Excellent chemical resistance to a wide range of chemicals Superior mechanical properties High elongation at break assists installation High tensile strength makes G75S ideal for dynamic applications Excellent steam resistance (ASME BPE 2000) FDA compliant - extraction tested to CFR 21 § 177.2600(e,f) USP Class VI <88> and USP <87> compliant 3-A Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients (ADI) Typical Applications Dynamic seals Static seals

66% Fluorine copolymers formulated for the ultimate in compression resistance. SP compounds are the best choice for O-rings.

Whenever FDA standard compliance is required, NEXA has the right solution with its top performance products PFX 8030 (white), NEXA® PFX 8025 (black) and PFX 8048 (white), specially developed for SIP (Steam in Place) cleaning and WFI (Water for Injection) systems. They grant superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications. They have a very stable behavior at high temperatures (PFX 8048 up to 310° C.), allowing the use in critical applications such as Stage II Sterilization processes, where other type of elastomers lose their sealing capabilities.

Kyflon™ 3084 represents a true advancement in perfluoroelastomer chemistry. It offers a combination of very high heat resistance in all conditions including steam up to 300° C.

66% Fluorine copolymers formulated for low cost. LC-THK compounds are fissure resistant in thick cross sections; these compounds also exhibit enhanced rubber-to-metal bonding.

66% Fluorine copolymers formulated for the ultimate in compression resistance. SP compounds are the best choice for O-rings.

Precision Associates inc. 608806 is a 75 durometer black Viton® Extreme™ ETP, formulated with FDA approved ingredients. This material exhibits excellent chemical resistance and is resistant to heat, petroleum based oils and aromatic fuels similar to other high fluorine fluoroelastomers. 608906 is also resistant to acids, low molecular weight esters, ketones and aldehydes. It has inherent resistance to base attack and volume changes in highly caustic solutions, amines and hot water.

66% Fluorine copolymers formulated for the ultimate in compression resistance. SP compounds are the best choice for O-rings.

Chengdu Dowhon Industry FD-451C is High tensile,low compression set,excellent mold release.

V75SR is a peroxide-cured FDA-compliant, fluoroelastomer (FKM) material developed to withstand steam-in-place (SIP) and clean-in-place (CIP) procedures within pipe work and vessels.Unlike other FDA-compliant fluoroelastomers, V75SR provides superior steam resistance, ideal for use in Stage II Sterilization processes which require exposure to steam up to 200°C (392°F).V75SR can be used for all types of applications requiring FDA, 3A and USP Class VI compliance. It is suitable for use in all product contact applications including dry, aqueous and fatty media.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes Excellent steam resistance up to 200°C (+392°F) Superior resistance to a wide range of solvents & chemicals Superior mechanical properties FDA compliant - extraction tested to CFR 21 § 177.2600 (e,f) 3A Sanitary Standard 18-03 Class 1 compliant Free from Animal Derived Ingredients Typical ApplicationsRecommended for use hygienic sealing in pharmaceutical, bio-analytical and food processing applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Ball segment valve seals (inflatable seals)

KRAIBURG FKM is fluoro-rubber used in applications such as seals (shaft ring seals, O-rings, tube applications), petroleum industry: down-hole, hydraulic applications, rollers, fuel lines, coatings and compensators for flue gas scrubbers.

V61C is a fluoroelastomer (FKM) material developed to offer increased efficiency and service life in low temperature applications.V61C extends the operational performance of FKM seals by a full 15°C lower than is possible with traditional FKM grades and sets a new industry benchmark in low temperature performance.V61C exhibits the same chemical and mechanical properties as conventional FKM grades and is available in almost any sized O-ring (standard and non -standard) and custom designed components.Key Attributes With a glass transition of -40°C (-40°F), V61C offers the widest operating temperature range of -51°C to +225°C Low compression set giving excellent seal performance Good elongation properties making fitting easier even at low temperature Excellent resistance to petroleum, oil, silicone and di-ester liquids Typical Applications Valves and pumps in cold operating environments Seal applications that are exposed to cold situations Applications that demand high variations in temperature

Peroxide cured, Fluoroelastomer Rubber, 70-80 IRHD. Tetrapolymer of vinylidene fluoride, perfluoromethyl vinyl ether, tetrafluoroethylene plus cure site monomer (CSM). Formulated using Viton? GLT. Viton? is a registered trademark of Dupont®. ASTM designation = FKM. ISO designation = FPM.Recommended for use in static or dynamic applications where low temperature performance is required. Chemical resistance is similar to that of standard fluoroelastomer. Low temperature performance superior to other grades of fluoroelastomer.

Description Perlast® G75TX is the ultimate ‘next generation' perfluoroelastomer, offering a combination of excellent chemical resistance and ultra-high temperature stability, simultaneously extending the operating limits in all aspects.Perlast® G75TX has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in- service performance in, for example, valves, pumps and mechanical seals.Perlast® G75TX is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft external diameter) and custom shapes.Key Attributes Very high temperature resistance Ultra low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Superior mechanical properties Long-term sealing efficiency at high temperatures Extremely low out-gassing properties Good steam resistance (ASME BPE 2000) Typical Applications Aerospace Chemical Processing Diesel Semiconductor Oil & Gas

66% Fluorine copolymers formulated for low cost. LC-LV compounds are also injection moldable.

Fluran F-5500-A is a Fluoroelastomer product. It is available in North America. Typical application: Hose/Tubing.Characteristics include: Chemical Resistant Corrosion Resistant UV Resistant Weather Resistant

A translucent brown fluoropolymer compound reinforced with semi- crystalline perfluoropolymer nano-particles, specially developed to meet the demands of the semiconductor industry.Nanofluor® Y75N combines a fully fluorinated nano-filler system which significantly reduces gas permeability. The absence of metallic or carbon-based fillers produces an exceptionally pure, translucent elastomer that is less prone to chemical attack with the benefit of reduced swelling following exposure to aggressive media.Nanofluor® Y75N is a truly novel material which bridges the gap between fluorocarbons (FKM) and perfluoroelastomers (FFKM). Its high fluorine content provides unrivaled purity, excellent high temperature capability and very good chemical resistance. Nanofluor® Y75N is a cost effective upgrade from FKM and fluorosilicone in many semiconductor applications.Key Attributes Good all round chemical and temperature resistance. Outstanding mechanical properties. Exceptional oxygen plasma resistance. Exceptionally pure - does not contain any inorganic fillers or metal oxides which cause particulation problems. Extremely low permeability and out-gassing properties making it ideal for vacuum sealing applications. High sealing conformity reduces surface permeation. Typical ApplicationsDesigned for use in semiconductor applications, including: NW and KF flange fittings Dry plasma etch Wet etch (acid based) Dry ashing Oxidation/diffusion Lithography Static seals: O-rings, body seals, cathode seals Gaskets

Specifically designed for flat panel dsiplay CVD and dry plasma etch equipment where seal reliability and minimal contamination are essential, FPD Blue 707 fluoroelastomer provides excellent chemical compatibility and withstands a variety of aggressive chemicals. Available in an infinite range of geometries and cross sections, this material offers the diversity required for a variety of dynamic or static dry processing applications. FPD Blue 707 remains stable at service temperatures up to 220°C (428°F) and is ideally suited for large lid seals and bonded slit valve door seals.

Fluoroelastomer Rubber, 90-98 °IRHD. Terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene. To meet ASTM D2000 line call-out M3HK914, A1-10, B37, B38, EF31, EO78, Z1. Where Z1 = hardness 90-98. ASTM designation = FKM. ISO designation = FPM.A hard, anti-extrusion resistant rubber, specially designed for use in high pressure applications. Excellent resistance to oils, fuels and hydraulic fluids at high temperature.

Perlast® G90A. Perfluoroelastomer 86-90 °IRHD. A black general purpose perfluoroelastomer compound with excellent chemical resistance.Exceptionally high chemical resistance and excellent steam resistance and mechanical properties. Extremely low outgassing properties. Do not use any Perlast® grade with molten alkali metals.

High fluorine tetrapolymers formulated for low temperature flexibility. HFLT compounds are excellent choices for fuel applications, including methanol-containing fuels, where low temperature flexibility is also essential. The LT compounds are designed for low temperature applications.

Greene FKM 759 is a Fluoroelastomer product. It is available in North America. Applications of Greene FKM 759 include engineering/industrial parts and sealing applications. Primary characteristic: chemical resistant.

Perlast® G75M is a black, multi-purpose, perfluoroelastomer compound that provides ultimate all-round resistance to a broad range of chemicals.Perlast® G75M offers an extremely low compression set, with modulus and hardness optimized to suit the majority of sealing applications. Perlast® G75M is ideally suited for use in mechanical seals and multi- substance chemical plants.Perlast® G75M can be molded into O-rings (any size up to 2m/6.5ft diameter) and custom shapes.Key Attributes Extremely low compression set Superior long-term sealing efficiency Broad chemical resistance High mechanical strength Typical Applications Pumps Valves Mechanical seals Chemical process and refining industries Couplings & fittings

Greene 409 is a Fluorosilicone (Fluoro Si) product. It is available in North America.

Chemraz XCD is a Perfluoroelastomer product. It is available in North America. Applications of Chemraz XCD include engineering/industrial parts and sealing applications.Characteristics include: Heat Resistant High Purity

Viton® /FKM/FFKM is the most specified fluoroelastomer, wel known for its excellent (400°F/200°C) heat resistance. Viton@ offers excellent resistance to aggressive fuels and chemicals and has worldwide ISO 9000 and ISO/TS 16949 registration. Viton® is a brand of synthetic rubber and fluoropolymer elastomer commonly used in O-rings and other molded components. We mold Viton@ O-rings for a variety of applications in the aerospace and industrial markets. Viton® O-rings are ideal in oil field applications where Viton® can resist aggressive properties of natural gas and oils.

55% Fluorine compolymers of tetrafluoroethylene and propylene. TFEP compounds exhibit outstanding resistance to hot water, steam, acids and alkalis. These compounds also give superior performance in amines and phosphate esters as compared to conventional fluoroelastomers.

The compound NEXA® PFX 8012 is a new chemical resistant Perfluoroelastomer (FFKM). It has been designed for very demanding sealing applications in aggressive chemical environments. PFX 8012 can withstand very aggressive conditions, such as almost all chemical species, hot organic and inorganic acids, alkalis, ketones, esters, alcohols, fuels and has an excellent water and steam resistance. It has excellent plasma resistance.

55% Fluorine compolymers of tetrafluoroethylene and propylene. TFEP compounds exhibit outstanding resistance to hot water, steam, acids and alkalis. These compounds also give superior performance in amines and phosphate esters as compared to conventional fluoroelastomers.

Da/Pro Rubber Fluorosilicones is a variation of silicone rubber that has been chemically modified to have enhanced chemical resistance similar to Fluorocarbons (FKM). It has all the characteristics of Silicone rubber, and even has excellent resistance to many solvents, oils, greases and fuels. It has the same temperature range of silicones, -90 Fto 400F. Fluorosilicone compounds process and mold the same as other silicones, but is considered a premium product due to its enhanced fluid resistance while maintaining excellent high and low temperature resistance and resistance to ozone, oxygen and weathering. Because of this, the cost is significantly higher than other silicones.

Detectaseal® XV7A is the latest advance in contamination detection and containment. This unique range of metal detectable elastomer compounds has been developed specifically to meet the stringent demands of the pharmaceutical and food processing industries.The Detectaseal® fragments as small as 2-3mm can be easily identified by in-line metal detection equipment used to detect product contaminated by process lines.The Detectaseal® range includes Nitrile, Silicone, EPDM and Fluoropolymer (FKM) elastomer compounds (all FDA-compliant) available in blue and black, which allows the most appropriate material to be selected for every application.Detectaseal® compounds can be molded into O-rings and custom components.Key Attributes Early detection and containment of contamination: Reduced product loss, Increased productivity Blue seals to assist in easy identification Excellent mechanical properties and sealing efficiency Exceptional oil and heat resistance FDA-compliant elastomer materials Free from animal-derived ingredients Typical Applications Static and dynamic sealing applications Food processing equipment Pharmaceutical drug manufacturing equipment Bioscience industry.

High fluorine tetrapolymers formulated for low temperature flexibility. HFLT compounds are excellent choices for fuel applications, including methanol-containing fuels, where low temperature flexibility is also essential. The LT compounds are designed for low temperature applications.

66% Fluorine copolymers formulated for the ultimate in compression resistance. SP compounds are the best choice for O-rings.

Seals Eastern Compound 7148 is 95-duro FKM.

V74C is a fluoroelastomer (FKM) material developed to offer extremely low compression set combined with excellent heat aging properties.V74C has been engineered to retain its mechanical properties significantly longer than conventional FKM grades even under extreme temperature cycling, thereby providing increased service life and significantly lower the cost of ownership.V74C exhibits good resistance to acids and aqueous media, and excellent resistance to oil, fuels and hydraulic fluids at high temperature.Available in any sized O-ring (fully molded up to 2m/6.5ft internal diameter) and custom designed components.Key Attributes Extremely low compression set and cumulative compression set providing extended seal life Excellent long-term high temperature stability Superior heat aging properties for long-term sealing Typical Applications Vacuum pumps & compressors (high temperature applications) Mechanical seals Chemical pumps and valves Couplings and quick connectors

Xyfluor® 860, a highly fluorinated elastomer compound, offers excellent chemical compatibility over a wide range of temperatures from -76°F to 450°F (-60°C to 232°C). Recommended for applications requiring a combination of low temperature properties and chemical resistance, Xyfluor's capabilities surpass those of standard fluoroelastomers, PTFE and graphite. Addtionally, Xyfluor reduces overall cost by extending equipment service life.