Products results

Cuyahoga Plastics AB5000 is a UV resistant, flame retardant, glass-reinforced polyester thermoset suitable for outdoor applications. Compression, transfer, and injection molding grades are available. It is currently supplied in bulk form, cut preforms, and box length extrusions.

T and GT-series pigments are thermoset, fluorescent pigments recommended for a wide range of applications where solvent resistance is required.

PEL-SIL™ CW300 a low molecular weight, nonionic silicone-based wetting additive that can reduce the surface tension of aqueous solutions significantly lower than conventional nonionic surfactants can. It is stable at neutral pH and compatible with other anionic surfactants and nonionic surfactants. Even at concentrations as low as 0.1 percent, PEL-SIL™ CW300 wetting additive will reduce surface tension below 22 dynes/cm. Therefore, it produces very rapid wetting and spreading on hard-to-wet surfaces. It shows an excellent and consistent performance over a wide range of substrates in various coating formulations. Its applications are found in plastic coatings, wood coatings, radiation curing coatings, automotive coatings, and printing inks, etc. PEL-SIL™ CW300 can also be used as an ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals. It allows complete coverage with herbicides, insecticides, fungicides and other agricultural chemicals. PEL-SIL™ CW300 meets the requirements of US EPA regulation 40 CFR 180.910 regarding “tolerances and exemption from tolerances for pesticide chemicals in or on raw agricultural commodities.” It is approved for both food and nonfood use.

IrisECO RED OXIDE (10) is a series of water-based high concentrated pigment dispersions for in-plant tinting. Developed for architectural paints, is used also in industrial paints, wood coatings and various other applications. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisECO colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

PET Plasticizer Dispersions product line is a series of conventional pigments dispersed in DINP. They have been specifically formulated for use in flexible vinyl applications and caulk applications. They exhibit excellent color strength and color characteristics.

T and GT-series pigments are thermoset, fluorescent pigments recommended for a wide range of applications where solvent resistance is required.

MIBK’s largest use is in industrial coatings application, industrial cleaning and surface preparation applications. For coatings formulators looking to replace HAPS (Hazardous Air Pollutant Solvents) with a biobased, sustainable, HAPS free alternative, VertecBio™ ELSOL® KTR2 is an ideal replacement for MIBK in a wide array of coatings formulations.

IrisBlend U BLUE (UB) is a series of universal colorants, specific for architectural paints for interiors and exteriors, designed to be used into tinting equipment. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisBlend U colorants are manufactured based on stringent specifications for perfect reproducibility of color strength, tone and rheology.

3-Thiocyanatopropyltriethoxysilane, amber transparent liquid. Silanes are used in a variety of industrial applications.Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

IrisBlend W GREEN (GV) is a series of water-based colorants, specific for architectural paints for interiors and exteriors, designed to be used with tinting equipment. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisBlend W colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

PEL-SIL™ CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solvent borne UV/EB coatings and inks. PEL-SIL™ CL400 is also a flow and leveling agent and defoamer. It may also be incorporated into polymer systems through its two primary hydroxyls in polyurethane systems.

IrisECO GREEN (G) is a series of water-based high concentrated pigment dispersions for in-plant tinting. Developed for architectural paints, is used also in industrial paints, wood coatings and various other applications. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisECO colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

IrisECO RED OXIDE (30N) is a series of water-based high concentrated pigment dispersions for in-plant tinting. Developed for architectural paints, is used also in industrial paints, wood coatings and various other applications. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisECO colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

SPL and WFD dispersions are based on a unique formaldehyde-free pigment technology. These products offer a bright, sub-micron, high strength, fluorescent pigment particle with good lightfastness properties. The SPL and WFD dispersions are suspended in water and suitable for use in water-based inks and coatings.

Santicizer® Platinum G-2000 is an efficient bio-based primary plasticizer that offers excellent heat stability, enhanced processability, and lower volatility than traditional General-Purpose Plasticizers. It can be used in techniques such as extrusion, calendaring, injection molding, rotational molding, and spread coating. It can be used in rubbers, epoxy resins, paints and coatings, as well as many other polymers. Santicizer® Platinum G-2000 has earned the U.S. Department of Agriculture (USDA) Certified Biobased Product label.

AdvaBond®7418 is a non-chlorinated water-based adhesion promoter for low surface energy substrates. It is designed to work on surfaces without any surface treatment such as corona or flame. AdvaBond®7418 can be used as a primer or as an additive to a paint, coating or adhesive formulations.

POP Polyurethane Dispersions are a series of high quality conventional color dispersions in a 3000 molecular weight polyether polyol. The line has been specifically formulated for use in urethane systems. They exhibit excellent suspension characteristics and provide a uniform and consistent blend and are ideal for sprayed two part urethane coatings.

CS series™ XPF0100S is a cross-linked polystyrene in highly spherical fine powder form. These cross-linked polystyrene particle materials exhibit high clarity, hardness, heat resistance and dimensional stability. CS Series™ cross-linked polystyrene materials are manufactured using TWO H Chem Ltd. Proprietary process technology.

IrisECO REFLECTIVE BLACK (IR) is a series of water-based high concentrated pigment dispersions for in-plant tinting. Developed for architectural paints, is used also in industrial paints, wood coatings and various other applications. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisECO colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

OG840 is a curing agent which find its applications in screenprinting where a good thermal resistance is required.

The DayGlo SPL-J Series Dispersions contain approximately 58% fluorescent pigment dispersed in water and a small percentage of alkali soluble acrylic resin. The SPL-J Series Dispersions are V.O.C. (Volatile Organic Compounds) free. They are compatible with a wide range of aqueous systems

Hi-Tint dispersions are recommended for in-plant tinting of solvent-based industrial, aerosol and trade sales coatings. These high strength conventional pigment dispersions incorporate high quality pigments in a unique alkyd vehicle system. Each colorant has been formulated for maximum pigment color value while maintaining a wide range of compatibility and characteristics such as non-settling, pourability, flocculation resistance and shelf stability.

PET Plasticizer Dispersions product line is a series of conventional pigments dispersed in DINP. They have been specifically formulated for use in flexible vinyl applications and caulk applications. They exhibit excellent color strength and color characteristics.

IrisBlend U YELLOW (UY) is a series of universal colorants, specific for architectural paints for interiors and exteriors, designed to be used into tinting equipment. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisBlend U colorants are manufactured based on stringent specifications for perfect reproducibility of color strength, tone and rheology.

ILCO PHOS 203 is mainly used as a wetting agent with defoaming ability in alkaline cleaning agents and in surface treatment for the printing and coating industry. Furthermore it is known as a dispersing agent in pigment pastes. In metal pigment pastes the ester acts as corrosion inhibitor. ILCO PHOS 203 is also used as extraction and flotation agents.

Methacryl-functional silane is used as an adhesion promoter at organic/inorgainc interfaces, as a surface modifier (e. g. Imparting water repellency, organophilic surface adjustment) or as a crosslinker of polymers. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

PEL-SIL™ CL340 is a nonreactive, acetate capped, silicone glycol copolymer surfactant supplied at 100 percent active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. Additionally, it provides mar resistance for coatings applications such as glossy printed materials. PEL-SIL™ CL340 is compatible with acrylic, epoxy, nitrocellulose, phenolic, polyester & polyurethane systems. With a low order of toxicity, this product acts as an anti-stick agent in printing ink applications. It is particularly useful for facilitating the slip of magazine covers over one another during printing and distribution. It is also used as a solubility aid to compatibilize blowing agents with isocyanates in the production of polyurethane foams. PEL-SIL™ CL340 is stable in neutral or mildly acidic or alkaline aqueous solutions. It Imparts anti-blocking and improves mar resistance of PU coatings. PEL-SIL™ CL340 is an effective leveling agent for synthetic leather top coatings.

Hi-Tint dispersions are recommended for in-plant tinting of solvent-based industrial, aerosol and trade sales coatings. These high strength conventional pigment dispersions incorporate high quality pigments in a unique alkyd vehicle system. Each colorant has been formulated for maximum pigment color value while maintaining a wide range of compatibility and characteristics such as non-settling, pourability, flocculation resistance and shelf stability.

IrisBlend W VIOLET (RR) is a series of water-based colorants, specific for architectural paints for interiors and exteriors, designed to be used with tinting equipment. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisBlend W colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

IrisECO BLACK (N) is a series of water-based high concentrated pigment dispersions for in-plant tinting. Developed for architectural paints, is used also in industrial paints, wood coatings and various other applications. Our colorants are binder-free, VOC-free, APE-free, formaldehyde-free and allow the final product to meet the most stringent health and environmental regulations. IrisECO colorants are produced based on strict quality specifications for perfect reproducibility of color strength, tone and rheology.

Cuyahoga Plastics AB4000 is a mineral-filled, glass fiber reinforced polyester thermoset suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms & box length extrusions.

PowderTEX 61 is an off-white free flowing polytetrafluoroethylene (PTFE) powder that has been treated with a higher surface area inert spacer to facilitate ease of handling.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.