Products results

Elastocon® 2855 thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2855 is FDA compliant and well suited for consumer products and medical applications. Elastocon® 2855 can be overmolded onto polypropylene.Elastocon® 2855 is supplied as ready to use pellets in 50 lb. bag quantities.

Calico Coatings CT-68 PFA is a black, non-stick coating which offers high temperature resistance, excellent mold release and is capable of conforming to complex shapes with thick or thin films. The coating was developed for industrial/medical processing, chemical handling and commercial cookware applications. FDA conformance is determined by choice of primer.

Silopren™ LSR 2670 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2070, Silopren™ LSR 2670 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2670 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2670 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Keypads Vibration dampers Pressure cookers parts Spark plug boots, catheters, parts of medical technical equipment s.o.

HS Carbon Fiber UD150H60 is a E3 Matrix System with a precursor as PAN.

LIM™ 6040 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 1500C (3020F) to 2050C (4000F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Jiaozuo Zhongwei Special Products Pharmaceutical PVPI (USP26) exists as free flowing,redish brown powder, non-irritant with good stability, dissolve in water and alcohol, insoluble in diethylethe and chloroform.

Elastocon® 8078NL is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a scratch and mar resistant surface finish. Elastocon® 8078NL is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078NL can be overmolded to polypropylene.Elastocon® 8078NL is supplied as ready to use pellets in 1000 lb. quantities.

fluteck™ P1000 PTFE Standard Grade is Virgin PTFE for Ram Extrusion, Compression and Isostatic molding.

Silopren™ LSR 4040 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4040 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4040 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4040 is particularly suitable for the following elastomeric articles: sealing elements, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters, parts for medical technical equipment, mats s.o.

HS Carbon Fiber UD600H60 is a E3 Matrix System with a precursor as PAN.

Elastocon® 2810 thermoplastic elastomer has been developed for applications that require ultra soft rubber-like properties and a good surface finish. Elastocon® 2810 is FDA compliant and well suited for consumer goods and industrial applications requiring non-slip/soft touch ergonomics and resilience. Elastocon® 2810 can be overmolded onto polypropylene.Elastocon® 2810 is supplied as ready to use pellets in 40 lb. bag quantities.

High impact SABIN ENGINEERING AAA HIPS sheets are special lightweight plastics used to accommodate lightweight products. AAA HIPS sheets have marginal resistance to impact and tearing. They are inexpensive and lightweight compared to all other plastic sheets. They are widely used for both single side and two side printing.

The advantages of Nuosen injection molding color masterbatch are fast production speed, high efficiency, automatic operation, variety of colors, shapes can be from simple to complex, size can be from large to small, and the product size is accurate, and the product is easy to update.

Dongguan SUGO Plastics Technology TH2025 has high mechanical strength, anti-static, static dissipative with good toughness and good dimensional stability.it is also conductive, EMI with good creep resistance and ROHS compliant, heat & cold resistance.

LNP Stat-Kon™ EE004 is a high performance material that exhibits high strength and heat resistant properties. Glass-filled grades provide improved rigidity and dimensional stability.

ProFlex™ SEBS ProPell™ Low Friction 75A 050-123C is a comprehensive range of medical grade Styrene Ethylene Butylene Styrene (SEBS) Thermoplastic Elastomers (TPEs). These unique polymers offer excellent elastomeric properties, with superior design flexibility and ease of processing via injection molding and extrusion. ProFlex™ SEBS is available in a range of durometers, with standard formulations, tear resistant and ProPell™ formulations also available. Tailored hardness and melt flow properties are also available for custom orders.

Elastocon® 8088BL is a black lubricated thermoplastic elastomer formulated for applications that require high impact resistance and a reduced coefficient of friction. Elastocon® 8088BL is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8088BL can be overmolded to polypropylene.Elastocon® 8088BL is supplied as ready to use pellets in 50 lb. bag and 1000 lb. box quantities.

Polymer Industries' Densetec® LDPE Sheet is a material that's soft, flexible, and tough, even at low temperatures. Because of the fact that Densetec® LDPE has very good formability traits and is very pliable, it is an ideal material for the orthotics and prosthetics industry. Densetec® LDPE has very good chemical resistance and low moisture absorption which makes it ideal for the chemical industry. Densetec® LDPE also has exceptional environmental stress crack resistance properties.

Silopren™ LSR 4070 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4070 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4070 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4070 is particularly suitable for the following elastomeric articles: sealing elements, respiratory devices, vibration dampers, tube connectors, pipette nipples, catheters, parts for medical technical equipment, mats s.o.

AFT Fluorotec AF201 Carbon Filled PTFE is the addition of carbon to PTFE increases the compressive strength and wear resistance. It provides good thermal conductivity and low permeability. Commonly used in sealing applications.

Silopren™ LSR 4660 is a two-component liquid silicone rubber for injection molding processes. The material performance is particularly characterized by high reactivity, low viscosity and high tear strength. The LSR 4660 enables particularly the production of parts for healthcare devices covering by USP Class VI such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanisates consisting of LSR 4660 are distinguished by the following properties: low viscosity and fast cure high tear strength sterilisable with ethylene oxide, steam and gamma radiation long service life at dynamic stress neutral odor and taste high recovery after puncture high temperature stability FDA 21 CFR 177.2600 compliance with US Pharmacopeia XXIII, Class VI (maximum contact time with human tissue 28 days).

ProFlex™ SEBS 75A 050-120C (Tear Resistant) is a comprehensive range of medical grade Styrene Ethylene Butylene Styrene (SEBS) Thermoplastic Elastomers (TPEs). These unique polymers offer excellent elastomeric properties, with superior design flexibility and ease of processing via injection molding and extrusion.

ProFlex™ SEBS ProPell™ Low Friction 85A 050-123B is a comprehensive range of medical grade Styrene Ethylene Butylene Styrene (SEBS) Thermoplastic Elastomers (TPEs). These unique polymers offer excellent elastomeric properties, with superior design flexibility and ease of processing via injection molding and extrusion. ProFlex™ SEBS is available in a range of durometers, with standard formulations, tear resistant and ProPell™ formulations also available. Tailored hardness and melt flow properties are also available for custom orders.

LIM™ 6030 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM 6030 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential Applications sports goggles and masks health care equipment camera parts coating metal rolls.

Dongguan SUGO Plastics Technology B3400 FR has high mechanical strength, anti-static, static dissipative with good toughness and good dimensional stability.it is also conductive, EMI with good creep resistance and ROHS compliant, heat & cold resistance.

MARFRAN.MED® ST has a high versatility to satisfy every request, all materials can be colored and available in transparent or crystal, suitable for both production by injection molding and for extrusion.

Elastocon® 2865PE thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2865PE is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2865PE can be overmolded and coextruded with polyethylene.Elastocon® 2865PE is supplied as ready to use pellets in 50 lb. quantities.

Elastocon® 8078N is a colorable thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8078N is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8078N can be overmolded to polypropylene.Elastocon® 8078N is supplied as ready to use pellets in 1000 lb. quantities.

The Addisil™ 442 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing Long shelf-life of 6 months for the single component if stored appropriately Very long pot life of 2 to 4 weeks for the mixed components.

Silopren™ LSR 2650 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2050, Silopren™ LSR 2650 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2650 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2650 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Diaphragms Keypads Bellows Catheters Pacifiers Baby teats Respiratory devices Vibration dampers Air vent flaps Switch cover Breast shields Nose pads Pressure cookers parts Spark plug boots Cable connectors Catheters, parts of medical technical equipment s.o.

Boltaron® 4335 is a impact resistant sheet.

Dongguan SUGO Plastics Technology B1399D has high mechanical strength, anti-static, static dissipative with good toughness and good dimensional stability.it is also conductive, EMI with good creep resistance and ROHS compliant, heat & cold resistance.

Dongguan SUGO Plastics Technology B2120-JC has high mechanical strength, anti-static, static dissipative with good toughness and good dimensional stability.it is also conductive, EMI with good creep resistance and ROHS compliant, heat & cold resistance.

Supreme Petrochem SC201LV is Suitable for large volume clear molded products Refrigerator components like crisper trays, egg shells etc.

The Addisil™ 480 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Silopren™ LSR 2665 by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications in Aerospace, Automotive and Aviation. It is available in Liquid form.