Products results

Fortimix® NC-3 is an additive for rubber that features surface-treated microspheres that serve as multifunctional process aids for enhanced properties. It is used to achieve toughness, elastic recovery, tear, and compression set, in addition to the processing benefits of Spherix® microspheres.

Repro-Lon Texas OX-60 is a Grade 3 product which consist of granular particles. Maintains an extremely slick and anti-stick properties. Suitable for grease applications, purge powder for extruders, braided packings, etc.

Kettlitz-Dispergator DS is a dispersing agent improving flow and extrusion properties of rubber compounds. The material, based on a water-in-oil emulsion of higher alcohols, esters and aliphatic fatty acids, is recommended to be used in EPDM and EPM, in NBR and butyl rubber compounds.

WB 222 - A blend of high molecular weight, aliphatic fatty acid esters and condensation products. These processing aids are zinc-free and are designed to improve processing with no reduction in cured properties.

Grillo-Werke AG Zinc Oxide Green Seal is a chemical element that is indispensable in the production of numerous everyday products. The variety of products calls for a specific choice of the Zinc Oxides used. With our wide range of products we are capable of perfectly meeting the various requirements for specific qualities. Zinc Oxide plays an essential role as activator in the vulcanisation process in the tire and rubber industry. It improves the elasticity of glazes in the ceramic industry..

Endex 1750™ is a 50% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Cel-Span® CFA 897 is a 40% active endothermic foaming agent concentrates recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 897 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications.

Fascom™ Natrium P is a fine particle, treated Sodium Bicarbonate.

Johoku Chemical JPE-308E is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

SA 0811 - For use with recycled rigid PVC where additional stabilization and lubrication is needed to reduce yellowing, burning and sticking in extrusion, injection molding and calendering.

Qingdao Zhongsu PE Wax H-100 is a polymerized type.

MUENCH CHEMIE Hose and profile release agent series MK-15504 is specially developed for the production of flexible hoses and profiles, as well as color filled hoses. Mold release agents and lubricants are especially suited for the production of all flexible hoses. These innovative products are free of water and solvent and absolutely silicone free and suitable for cold and hot forms/mandrels.

MoldWiz® INT-36PBT - A process aid additive that Improves resin flow/fill, improves dispersion of other resin additives (reinforcements, fillers, and pigments), shortens cycle times, reduces temperatures and pressures of molding machines, and reduces or eliminates weld/knit lines. Eliminates the need for an external mold release agent. An effective addition of this process aid additive will not have any adverse effect on physical properties or secondary operations such as decorating, printing, bonding, or plating.

WA 48A - A highly effective processing aid mainly used for specialty polymers. It contains a combination of zinc soaps and fatty acid esters tailor-made for use in epichlorohydrin rubber (ECO) to improve flow properties and release.

Trecora Chemical OX-18 is an oxidized polyethylene wax. Provides anti-block, release and gloss control properties. It is easily emulsified. Imparts a non-stick character to a coating that decreases the tendency for blocking. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-18 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

MoldWiz® INT-54 - A process aid additive with anti-static properties which is incorporated directly into the resin or gel coat eliminating the need for an external mold release agent. FRP molds require a surface coating to seal the porosity and maintain the gloss. An effective addition of process aid additive will not have any adverse effect on the cured resin. Thermoplastic molded parts will be stress-free and thermoset parts may have improved Barcol hardness. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding, or plating

Otsuka Chemical Unifoam AZ ultra #1195-I have been developed with powder technology and surface treatment technology to avoid caking and dust pollution. UNIFOAM AZ is the most widely used foaming agent for plastics and rubbers. We have recently developed UNIFOAM AZ ULTRA. This new foaming agent has perfect anti-caking qualities, is free flowing, and has a low percentage of dust.

ProFLOW 1000 is high flow rate (MFR 1500+) polypropylene resin that quickly melt to low viscosity Newtonian fluids.

MoldWiz® INT-619 - A process aid, resin additive that will improve flow properties while maintaining MFI. Will also enhance dispersion of other resin additives (reinforcements, fillers, pigments, etc.); increase through-put; reduce cycle time; permit effective processing/molding at lower temperatures and pressures. May be used to improve the surface appearance and scratch resistance of molded parts. An effective addition of process aid additive will not have any adverse effect on the cured resin or interfere with secondary operations such as printing, painting or bonding.

MoldWiz® INT-35UDH - A process aid additive with anti-static properties which is incorporated directly into the resin. Eliminates the need for an external mold release agent. Improves resin flow, improves dispersion of other resin additives (reinforcements, fillers, and pigments), shortens cycle times, reduces temperatures and pressures of molding machines, and reduces or eliminates weld/knit lines. An effective addition of process aid additive will not have any adverse effect on physical properties or secondary operations such as decorating, printing, bonding, or plating

Huaxia Chemical Group Chlorinated Paraffin 52# has the characteristics of extrusion resistance, good compatibility, low volatility, flame retardant, low toxicity, odorless, good chemical stability, moisture resistance and chemical corrosion resistance. It is used in oil. In lacquer, chlorinated rubber and styrene-butene resin coatings, in plastic products, it is used as flame retardant, binder and filler, lubricating additive, and is mainly used as an auxiliary additive for vinyl chloride products. Plasticizer.

Changzhou Juyou New Material Technology JY201-10000 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

Hangzhou Hi-Tech Fine Chemical HCZ1085 is mainly used for extrusion processing to the drainage pipes, profiles, shutters.

Qingdao Zhongsu PE Wax H-23 is a polymerized type.

Taizhou Huangyan Donghai Chemical Antiscorch agent CR-X(SpecIal for CR) is is light yellow powder, insoluble in water, non-toxic, and odorless. It is complexed with organic metal ions and N-S-structure organic compounds.

Sunlube EBS DA-SF is in fine powder form and chemically known as Ethylene Bis Stearamide.

Ishihara Sangyo Kaisha Ltd. Titanium oxide MC-90 has been widely used as a carrier material for catalysts mainly used in thermal power plants, waste incinerator exhaust gas treatment equipment, automobile exhaust gas purification equipment, etc. Titanium oxide material is characterized by its strong resistance to deterioration of catalyst performance due to sulfur components in fuel, and the role of titanium oxide for catalyst carriers will continue to become more important for the conservation of the global environment.

TRACEL® TSE 7142 TP 1102 is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

CHEMLUBE® Ester H is improves dispersion and filler incorporation for many elastomers. Lowers injection pressure and improves mold flow and release.

Rayton Chemicals PVI dissolves in acetone, benzene, toluene, ethyl ether, ethyl acetate as well as warm carbon tetra chloride, ethyl alcohol and heptane. It slightly dissolves in gasoline, but insoluble in kerosenne and water.

Ficel® HC AZ 40 is used as Flexible PVC, Rigid PVC, Polyolefin.

V-HRW - Highly compatible lubricant with both internal and external properties.

McLube® 787 is a water-based, heat-cured emulsion designed to prevent prerelease of large rotationally molded parts and provide multiple releases per application. Delivered ready-to-use.

Johoku Chemical JP-333E is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

TR 071 - Similar to TR 016 except the calcium ion is replaced by a zinc ion. Works well in HIPS, PS and color concentrates.

VLB-602 - External lubricant, excellent for calendering clear rigid PVC, and high speed wire & cable. VLB-618 is the vegetable based version.