Products results

Taoka Chemical RP-3X is a cyanoacrylate adhesive that contains ethyl -2-cyanoacrylate used in bonding of metals, plastics, rubbers, wood etc. With humidity cure.

GlucoStar® C500F-HV is a coldwater soluble, high viscosity, anionic polymer for use in industrial applications. It is a substituted natural polysaccharide designed to impart enhanced functional properties including: solution stability, surface activity, water retention, improved rheology and viscosity. GlucoStar C500F-HV also offers a unique alternative to competitive natural and synthetic water-soluble polymers. GlucoStar C500F-HV is specifically designed for use as a viscosifier in vat dyestuffs for textile flat goods printing applications. In addition, the ultra-low level of insoluble particles and high viscosity of GlucoStar C500F-HV makes it a good thickener for screen-printing

BONTAMIDE 2040 is a non-sagging, thixotropic paste, an adhesive to old and new cement.

Mo-Sci Corporation GL1707 is a compliant (viscous) sealing glass white colored in powder form.

Hot polymerized SBR 1009AF is used in spray applied adhesives, calendared products, and extruded mechanical goods where smoothness and controlled shrinkage are critical requirements.

MMA 3560 is recommended for larger structral assemblies, where long open time is required. Used for bonding applications in fibergladd boats with bond lines upto 25mm. Offers good tougness and excellant impact resistence.

NGAC G907-52 is a room temperature curable epoxy adhesive with a low viscosity. This two-part system has a strong adhesion to glass, ceramics, most metals, and plastics.

FiberStar® Y is a cold-water soluble, low viscosity, non-ionic polymer for use in industrial applications. FiberStar Y is a natural polysaccharide designed to impart enhanced functional properties including: adhesion/binding, water retention, improved rheology and viscosity. FiberStar Y is an excellent product for binding and adhesive applications where economics is important. FiberStar Y is a cost-effective corn-based product with excellent binding and adhesion properties.

Colquimica Adhesives B-2808 is used for chipboard and/or MDF assembly, particularly for bonding cardboard. Also appropriate for packaging applications.

Rit-Chem ZN89 is zinc resinate. Used as a cross-linking agent with phenolics to promote high temperature resistance in resin/rubber mixtures (chloroprene, nitrile, NRT, etc).

SONLOK® 3603 is a high strength anaerobic retaining compound for cylindrical fitting parts. This adhesive designed to develop bonds even on surfaces lightly contaminated with oil. SONLOK® 3603 retaining compound is a single component anaerobic adhesive, which develops high strength rapidly when confined in the absence of air between close fitting metal surfaces.

SureTac 1340 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

StarBond® 140 is a cold-water soluble, low viscosity, non-ionic polymer for use in industrial applications. It is a natural polysaccharide designed to impart enhanced functional properties including: adhesion/binding, water retention, improved rheology and viscosity. StarBond 140 is an excellent product for binding and adhesive applications where economics is important.

Griffon Polyurethane adhesive is Thixotropic, filling, waterproof, 2-component assembly adhesive based on polyurethane. .

MXBON® LIGHT CURE CYANOACRYLATE 22449 is a odorless light-curing cyanoacrylate adhesive. It is designed for bonding applications that require very rapid fixture, filet cure or surface cure. The UV and visible light cure properties facilitated rapid curing of exposed surface area and makes it a unique product in the world of light-curing adhesive.

Drolite™ 9042 is a phenalkamine used as a curing agent for various Epoxy Resins. Specially for marine coatings and other industrial applications.

Seiko PMC X-1 is styrene-acrylic resin product used in a wide range of fields including eco-friendly water-based printing ink, recording materials for laser beam printers and copiers, coating materials, adhesives, clear coating, and paper processed products.

ResinLab® RC8041 anaerobic retaining compounds are designed for use in demanding applications to fill the spaces and surface irregularities between tightly mated cylindrical parts. These products form a tough permanent bond which greatly enhances the torque and pullout strength. They are single component solvent free materials manufactured in a wide variety of viscosities and setting times to satisfy specific bonding applications. This technology increases the reliability and performance of assemblies while reducing dependence upon maintaining costly tight machining tolerances.

GlucoStar® C500F is a cold-water soluble, high viscosity, anionic polymer for use in industrial applications. It is a substituted natural polysaccharide designed to impart enhanced functional properties including: solution stability, surface activity, water retention, improved rheology and viscosity. GlucoStar C500F also offers a unique alternative to competitive natural and synthetic water-soluble polymers. GlucoStar C500F is specifically designed for use as a viscosifier in vat dyestuffs for textile flat goods printing applications. In addition, the ultra-low level of insoluble particles and high viscosity of GlucoStar C500F make it a good thickener for screen-printing

Rit-Chem BT115 is alpha and beta pinene polyterpene resin. Used in hot melt and solvent-based pressure sensitive adhesive applications.

POLYTONE™ AP 112 is a heat reactive alkyl phenolic resin formulated for use in Neoprene rubber adhesives. It imparts low initial viscosity and viscosity stability to adhesives of this type.

AH330 is a Ground ATH is used in Electronics, Glassware, Spray Up.

Foreverest Resources Colorless Glyceryl Hydrogenated Rosinate GEHR100H is a kind of super light color tackifying polyols resin, which is esterified from refined hydrogenated rosin and edible glycerol, and through series combined technologies units of catalytic hydrogenation. With benefits of light color, low odor, good heat stability and excellent aging resistance, CGEHR is mainly used in screen protection film, medicinal patch, diaper adhesive, PSA and HMA.

LHC623 Heat Conductive Sealant/Retainer is White liquid in appearance.

Silicone Solutions AA-106 is a fast curing, high strength acetoxy silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and excellent adhesion. AA-106 is a 1-part silicone that when applied to the substrate allows handling of the bondedassembly within minutes. AA-106 works well in manual and automatic dispensing equipment.

ResinLab® RC8048 anaerobic retaining compounds are designed for use in demanding applications to fill the spaces and surface irregularities between tightly mated cylindrical parts. These products form a tough permanent bond which greatly enhances the torque and pullout strength. They are single component solvent free materials manufactured in a wide variety of viscosities and setting times to satisfy specific bonding applications. This technology increases the reliability and performance of assemblies while reducing dependence upon maintaining costly tight machining tolerances.

SureTac 1325 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

SPUR+™ 3040 prepolymer is an excellent candidate to consider as a binder for high strength adhesives requiring adhesion to a variety of substrates. The low viscosity o SPUR+™ 3040 prepolymer has shown it to be easy to formulate and use for the manufacture of adhesives. Many applications have benefited from the excellent heat resistance of SPUR+™ 3040 prepolymer in circumstances where thermal stability is required.

ORIBAIN™ BPS 4429-4 is an adhesive used for foam / rough surface applications.

ORIBAIN™ BPS 6080TFK is an adhesive used for general/foam tape, high peel applications.

ORIBAIN™ BPS 5375 is an adhesive used for general/foam tape, high peel applications.

Seiko PMC X-228 is styrene-maleic acid resin product used in a wide range of fields including eco-friendly water-based printing ink, recording materials for laser beam printers and copiers, coating materials, adhesives, clear coating, and paper processed products.

ORIBAIN™ BPS 5215K is an adhesive used for various film, middle peel applications.

ORIBAIN™ BPS 5565K is an adhesive used for general/foam tape, High peel applications.

ORIBAIN™ BPS 5227-1 is an adhesive used for various film, low peel applications.