Products results

VINNAPAS® 401 is a vinyl acetate-ethylene copolymer dispersion stabilized with polyvinyl alcohol and has a glass transition temperature (Tg) of -15 °C. It is specifically formulated to provide easy clean-up, extended open time, and exceptional film flexibility. VINNAPAS® 401 is commonly used as a base for adhesives, offering a well-rounded combination of excellent wet tack, fast setting, strong adhesion, and heat resistance.

DEHESIVE® PSA 850 R is a solvent-based silicone pressure-sensitive adhesive intended for coating films but also other substrates. It can be used for coating several film  substrates, such as polyester, polyamide, polyimide, and others, for the manufacture of different silicone pressure-sensitive adhesive tapes and other articles.

WACKER® Silicate MKS is an ethyl silicate binder suitable for the formulation of one-pack ethyl silicate zinc-rich primers. These primers are excellent anti-corrosive coatings. WACKER® Silicate MKS is a binder with outstanding anti-setting properties. Paints formulated with it are easy to stir up, even if they have been stored for a long time.

VINNAPAS® EP 708 (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion. It demonstrates excellent machinability and strong wet tack. Additionally, it offers enhanced adhesion to films, including polyvinyl chloride. VINNAPAS® EP 708 (NJG) is chemically stable at both high and low pH. It has very high plasticizer and solvent viscosity thickening responses. It is compatible with an assortment of resins, solvents, plasticizers, and other modifiers, as well as the other VINNAPAS® EP dispersions.

GENIOSIL® GF 80 is an epoxy functional alkoxysilane. When used as a coupling agent in mineral-filled plastics, it enhances filler dispersibility, reduces sedimentation tendency, and significantly lowers the resin's viscosity. Moreover, it allows for higher filler loading and provides notable improvements in water (vapor) resistance, as well as resistance to acids and bases. In the realm of adhesives and sealants, incorporating GENIOSIL® GF 80 enhances adhesion to the substrate and improves mechanical properties like flexural strength, tensile strength, and modulus of elasticity.

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

VINNOL® H 15/45 M Special is a specialized carboxylate-containing terpolymer composed of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 0.5 wt.% dicarboxylic acid. Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic and physically drying binder creates a film as the solvent within the formulation evaporates.

VINNAPAS® 920 is a carboxylated, poly(vinyl alcohol) stabilized, vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of -20 °C. It offers excellent flow, wetting, and adhesion to a wide variety of polymeric films, coatings, and other difficult substrates.

DEHESIVE® 902 AMA® is a solvent-free, addition-curing silicone fluid formulated for release applications on paper and filmic substrates. It is an integral component of a multicomponent release coating used in the production of paper and filmic release liners. These liners are widely utilized in the manufacturing of single- and double-sided industrial laminates.

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

HDK® T40 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® T40 finds applications in flexographic printing, gravure printing, industrial wood coatings, inkjet paper, offset printing, and printing inks.

SILRES® 64558 VP is a toluene-based, ready-to-use formulation based on polysiloxanes and silicone resins. The product is preferably used as a binder in highly flexible composite tapes or as an intermediate to manufacture silicone pressure-sensitive adhesive (PSA) formulations. In composite tapes, SILRES® 64558 VP contributes to the tapes' excellent electrical insulation properties and outstanding long-term heat resistance. Besides, composite tapes made with SILRES® 64558 VP are highly stable against environmental impacts such as moisture, pollutants, and UV light, allowing them to be exposed continuously to constantly changing climatic conditions or UV radiation.

WACKER® Crosslinker V 90 is a solvent-free hydrogenpolysiloxane containing reactive Si-H groups. It is known for its fast curing properties, good release stability, and excellent anchorage to a wide variety of substrates. The fast-curing properties of WACKER® Crosslinker V 90 also enable the use of a low platinum concentration.

ELASTOSIL® N291 is a free-flowing, ready-to-use silicone rubber that can be vulcanized at room temperature or at high temperatures when exposed to atmospheric moisture. It is specifically designed for printing sealing patterns on various substrates, such as steel or cylinder head gaskets containing or free of sulfur. This can be achieved using silk-screen printing techniques.

VINNOL® E 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It functions primarily as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNAPAS® 536 ED is a versatile polymer dispersion based on vinyl acetate and ethylene with a high solid content. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content is below 1000 ppm. The dispersion is characterized by high bonding strength combined with increased flexural strength and good compatibility with inorganic fillers like CaCO3.

WACKER® Crosslinker V 58 is a hydrogenpolysiloxane that contains reactive Si-H groups. It offers excellent cure properties, allowing for low platinum concentration and low temperature cure. This crosslinker provides good release stability, ensuring consistent performance over time. It also demonstrates good anchorage, which may vary depending on the substrates used.

VINNAPAS® EF 101 is an aqueous dispersion of a vinyl acetate-ethylene copolymer stabilized with surfactants. It has a glass transition temperature (Tg) of 0°C and was specifically developed as a pigment binder for paper, paperboard, and specialty coated papers. This product offers a good rheology response at high coating solids and is manufactured without the use of alkylphenol ethoxylate (APEO) surfactants or defoamers.

HDK® H20 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H20 is used as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. It also serves as a reinforcing filler in elastomers, particularly silicone-elastomers. Additionally, HDK® H20 acts as a free flow additive in the production of powder coatings.

SILFAR® SE 4 is a silicone antifoam emulsion that finds its use in the food and pharmaceutical sectors, as well as in fermentation processes and agrochemical formulations. It serves as an effective antifoam agent in various stages, including fermentation and downstream processes like active ingredient extraction and solvent recovery, where compliance with USP and EP standards is necessary.

VINNAPAS® EP 710 is a high-viscosity vinyl acetate-ethylene copolymer dispersion that is characterized by its low formaldehyde and low free VAM residue content. It exhibits good machinability and strong wet tack. VINNAPAS® EP 710 provides enhanced adhesion to films, particularly polyvinyl chloride. Additionally, it demonstrates high-viscosity thickening responses to plasticizers and solvents.

SILRES® BS 310 is a solventless emulsion that can be thinned with water. It consists of polysiloxane modified with a functional silicone resin. This product is specifically designed to be added to aqueous masonry coatings and primers, either during or after their manufacture. When used undiluted, SILRES® BS 310 serves as an additive for aqueous indoor paints or coatings. Its purpose is to enhance the workability of the paint or coating, resulting in improved application properties. This product is highly compatible with indoor paints and has a positive influence on wetting and leveling properties.

VINNAPAS® EN 421 is an aqueous, self-crosslinking copolymer dispersion of vinyl acetate and ethylene, manufactured without the use of alkyl phenol ethoxylate (APEO)-based materials. It is particularly suitable for formulating heat-curing or self-curing adhesives. This dispersion offers the softness and flexibility typical of a vinyl acetate-ethylene copolymer adhesive base.

VINNAPAS® EP 1 is a plasticizer-free polymer dispersion based on vinyl acetate and ethylene monomers. It exhibits good adhesion to various plastic surfaces, providing a permanently flexible glue line. It is particularly suitable for applications such as adhesives for paper packaging and PVC furniture foil adhesives.

VINNAPAS® EP 400 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. It exhibits good adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints with high cohesion. It is suitable for a range of applications, including adhesives for paper packaging and PVC furniture foil adhesives.

SILFAR® E 1049 is a silicone fluid emulsion specifically formulated for a wide range of applications, including those in the food and pharmaceutical industries. It is composed of components that meet the necessary standards outlined in the relevant EP and USP monographs. SILFAR® E 1049 can be utilized as an excipient in pharmaceutical products, although it cannot be used as an active pharmaceutical ingredient.

VINNAPAS® EP 707K (ULS) offers excellent elongation, water resistance, and flexibility. It features the fastest setting speed among the VINNAPAS® EP product lines. Thanks to its low viscosity and rapid setting speed, VINNAPAS® EP 707K (ULS) is highly suitable for high-speed packaging machine applications.

VINNAPAS® EP 760 is a unique rapid-setting vinyl acetate-ethylene copolymer dispersion. It stands out as more than just a high-solids version of the VINNAPAS® EP series. This polymer exhibits exceptional adhesion to challenging substrates that are typically difficult to bond, such as polyester, polyethylene terephthalate, tempered aluminum foil, and polystyrene.

WACKER® Silicate S100 is a ready-to-use ethyl silicate binder with a flash point above 21°C. It is primarily used for formulating single-pack ethyl silicate zinc-rich primers, which are commonly used as anti-corrosive coatings. This product is particularly suitable for applications in marine, protective, and industrial coatings.

VINNAPAS® EP 701K is a polymer dispersion based on vinyl acetate and ethylene. It offers excellent elongation, water resistance, and flexibility. This dispersion also demonstrates outstanding adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints and high adhesion.

VINNAPAS® 400 H is a poly(vinyl alcohol)-stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0°C. It was developed as a higher-viscosity, high-performance dispersion offering a superior balance of adhesive and cohesive properties useful in achieving much higher formulation viscosities.

HDK® H13L is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H13L is primarily used as a thickening, thixotropic, and anti-sedimentation agent in various applications such as coatings, printing inks, adhesives, and others. It finds its main application in polar systems. The strong hydrophobicity of HDK® H13L makes it particularly suitable for solvent-free systems, high solids formulations, and waterborne coatings.

VINNEX® 2522 is a solid, thermoplastic homopolymer that is transparent, colorless, and odorless. It is produced through the polymerization of vinyl acetate. This product is commonly used for modifying biopolymers and biopolymer compounds, as well as for blending with natural fibers or flours like wood, starch, and cork.

HDK® H1000/4 is a highly efficient free flow additive designed specifically for use in various types of electrophotographic toners, including monocomponent magnetic toners, monocomponent nonmagnetic toners, dual-component toners, crushed type toners, and polymerization toners. It offers medium surface area (BET) and consists of medium-sized silica particles.

VINNOL® H 15/42 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic and physically drying binder undergoes film formation as the solvent present in the formulation evaporates.

VINNAPAS® EP 6300 is a high-solids vinyl acetate-ethylene (VAE) copolymer dispersion with carboxylation. It has a glass transition temperature (Tg) of 0°C. This dispersion exhibits excellent adhesion to films and metals, and it also offers impressive cohesive film strength. Furthermore, it has the ability to be crosslinked.