Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Adhesive & Sealant Type
- Application Details
- VINNAPAS® EP 710 is especially suitable for the application of low formaldehyde and low free VAM residue.
- VINNAPAS® EP 710 offers several advantages in relatively slow-speed PVC laminating applications because of its higher starting viscosity.
- VINNAPAS® EP 710 bonds such widely diversified substrates as paper, wood, cotton cloth, nylon cloth, hardboard, urethane foam and certain types of coated paperboard.
- Typical application fields of VINNAPAS® EP 710 are as follows:
- Packaging (window cartons and carton forming)
- Bookbinding
- Textiles and Upholstery
- PVC lamination and OPP lamination
- The high plasticizer/solvent viscosity thickening response of VINNAPAS® EP 710 is very useful to develop various highperformance waterborne adhesives with one VAE copolymer dispersion.
Properties
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Appearance of the Dispersion Film Clear glossy - Visual Density (at 20°C) approx. 1.07 g/cm³ ISO 2811 Elongation (at break) approx. 600 % DIN EN ISO 527-3 Filler and Pigment Compatibility Very good - Specific method Glass Transition Temperature approx. (0 - 4) °C Specific method Minimum Film Forming Temperature 0 °C DIN ISO 2115 Predominant Particle Size approx. 1 µm Specific method Protective Colloid (Emulsifier System) Polyvinyl alcohol - - Surface of the Dispersion Film Slight dry tack - Specific method Tensile Strength approx. 6.0 N/mm² DIN EN ISO 527-3 - Specifications
Value Units Test Method / Conditions Dynamic Viscosity (at 25°C) 4400 - 5400 mPa·s DIN EN ISO 2555 Formaldehyde max. 15 ppm Specific method pH 4.0 - 6.0 - DIN/ISO 976 Residual Monomer (Vinyl acetate) max. 100 ppm Gas Chromatography Solids Content min. 54.5 % DIN EN ISO 3251 - Properties
- VINNAPAS® EP 710 is chemically stable at both high and low pH.
- It is compatible with an assortment of resins, solvents, plasticizers and other modifiers as well as the other VINNAPAS® EP dispersions.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 9 Months
- Storage Information
- When the dispersion is stored in tanks, proper storage conditions must be maintained. The product has a shelf life of 9 months starting from the date of manufacture if stored in the original, unopened containers at temperatures between 5 and 30°C.
- Iron or galvanized-iron equipment and containers are not recommended because the dispersion is slightly acidic. Corrosion may result in discoloration of the dispersion or its blends when further processed. Therefore, the use of containers and equipment made of ceramics, rubberized or enameled materials, appropriately finished stainless steel, or plastic (e.g. rigid PVC, polyethylene or polyester resin) is recommended.
- As polymer dispersions may tend to superficial film formation, skins or lumps may form during storage or transportation. Filtration is therefore recommended prior to utilization of the product.
Preservation for Transport, Storage and further Processing
- The product is adequately preserved during transportation and storage if kept in the original, unopened containers. However, if it is transferred to storage tanks, the dispersion should be protected against microbial attack by adding a suitable preservative package. Measures should also be taken to ensure cleanliness of the tanks and pipes. In unstirred tanks, a layer of preservative-containing water should be sprayed onto the surface of the dispersion to prevent the formation of unwanted skin and possible attack by microorganisms.
- The thickness of this water layer should be < 5 mm for low viscosity dispersions and up to 10-20 mm for high viscosity products. Proper procedures - periodic tank cleaning and sanitization - must be set up in order to prevent microbial attack. Contact your biocide representative/supplier for further plant hygiene recommendations.
- Measures should be taken to ensure that only clean air enters the tank when the dispersion is removed. Finished products manufactured from polymer dispersions usually also require preservation.
- The type and scope of preservation will depend on the raw materials used and the anticipated sources of contamination. The compatibility with other components and the efficacy of the preservative should always be tested in the respective formulation. Preservative manufacturers will be able to advise you about the type and dosage of preservative required.