Products results

VESTAMID® NRG 2101 YE is a high-molecular-grade PA-12 material developed by Evonik. It is designed for use in thermoplastic piping systems at higher operating pressures and larger diameters, replacing metallic piping systems in a safe and cost-effective manner. It offers superior performance characteristics.

VESTAMID® NRG 3001 NC is a polyamide 12 compound specifically developed for the manufacturing of hydrocarbon transport piping systems and liners. This material offers easy processing and excellent dimensional control during pipe extrusion, particularly for large diameter pipes. VESTAMID® NRG 3001 demonstrates exceptional compatibility with hydrocarbons such as crude oil, as well as oilfield chemicals like paraffin inhibitors. As a result, it delivers high dimensional stability and maintains unaffected properties for parts in contact with these substances. Experience the reliability and performance of VESTAMID® NRG 3001 in your hydrocarbon transport applications. Choose VESTAMID® NRG 3001 for its superior properties, easy processing, and excellent dimensional control, ensuring optimal performance and durability in your piping systems and liners.

DRA 200 is a concentrated high molecular weight polymer emulsion which is designed to hydrate quickly and reduce pipeline friction by 50-60%.

Kemsurf PWS is Based on a linear high 2-phenyl based alkylate. Isopropylamine salts have better solubility in hydrocarbon solvents compared to sodium salts.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

StrongBond™ 200 Adhesive Putty System is a high-strength, toughened, structural epoxy adhesive for the bonding of carbon fabrics to itself and many dissimilar materials. It is a two-phase (toughened) epoxy resin produced using a CTBN elastomer with a flexible epoxy resin backbone for maximum stress and fatigue resistance. StrongBond™ 200 Adhesive Putty System with an immediate high tack consistency, a long working life, and a quick cure time. StrongBond™ 200 Adhesive Putty System may be used at ambient temperature(s) ranging from 55°F(13°C) to 100°F (38°C). The working life at 100°F (38°C) is > 2 hours (working time increases with lower ambient temperatures), with full cures occurring between 6-12 hours depending on cure temperature. Unlike most epoxy adhesives, StrongBond™ 200 Adhesive Putty System cured at ambient temperatures provides heat resistance well more than most engineering limits with an HDT of 85°C (185 °F). The material mixes at 2:1 by volume or 100:44 by weight (resin to hardener). The convenient color-coded components form a uniform color when properly mixed. StrongBond™ 200 Adhesive Putty System is designed for high production meter/mix ram dispensing and although highly thixotropic, has very fast application rates. With low odor and toxicity, StrongBond™ 200 Adhesive Putty System is solvent-free, and 100% solids.

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

DAI-EL GBR-6002 features a solid physical form with good processability, alkali resistance, and steam resistance. It is applicable in industrial markets, particularly in oil, gas, and mining exploration and upstream. With a chemical cure method, this product is suitable for O rings and turbocharger hoses.

DAI-EL GBR-6005 is a solid product with features like good processability and resistance to alkali and steam. Targeting industrial markets, it caters to applications in oil, gas, and mining exploration and upstream. Utilizing a chemical cure method, it is suitable for O rings and turbocharger hoses.

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

Neoflon EFEP RP-5000, in pellet and solid forms, shares key features with RP-4020, including chemical resistance, good adhesion, and a low melting point. Targeting similar markets, it finds application in automotive fuel systems, oil, gas, and mining exploration, as well as semiconductor manufacturing. With its processing methods covering coextrusion, compression molding, extrusion, hot melt, and injection molding, it caters to a diverse range of end uses such as automotive fuel lines, blown containers, fuel hoses, and semiconductor applications.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

Neoflon EFEP RP-5000AS, presented in black pellets and solid forms, combines chemical resistance, conductivity, and good adhesion. Designed for automotive, electrical, electronics, industrial, and printing and packaging markets, it finds applications in automotive fuel systems, oil, gas, and mining exploration, and semiconductor manufacturing. The product excels in automotive fuel lines, blown containers, fuel hoses, and semiconductor applications, offering versatility through coextrusion, compression molding, extrusion, hot melt, and injection molding.

Neoflon EFEP RP-4020, offered in pellet and solid forms, boasts features such as chemical resistance, excellent transparency, good adhesion, and a low melting point. Targeting markets like automotive, electrical, electronics, industrial, and printing and packaging, this product is suitable for applications such as automotive fuel systems, oil, gas, mining exploration, and semiconductor manufacturing. With compatibility with various polymers and resins, it excels in automotive fuel lines, blown containers, fuel hoses, and semiconductor applications.

Tasnee HD 100 Orange is a High Density Polyethylene, orange colored resin. The product is classified as PE 100. Tasnee HD 100 Orange provides excellent environmental stress cracking resistance properties (ESCR) with very good long term hydrostatic strength and combines very high impact and stiffness properties.

Z73B is a Copolymer of acrylonitrile and butadiene with a medium ACN content of 30 - 45%.HNBR materials typically provide superior heat resistance, excellent mechanical properties, combined with exceptional resistance to oils, hydrogen sulfide, amines present in crude oil, high energy radiation, ozone and weathering.Z73B is accepted by the UK Ministry of Defense (MOD) to Defense Standard 02-337 part 1, issue 2 (NES 337) for use on naval ships and submarines.Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter) and custom designed components.Key Attributes Excellent chemical resistance Excellent wear resistance and mechanical properties Accepted by M.O.D. to Def. Stan. NES 337 Meets ASTM D2000/SAE J200 line call-out M4DH716, A26, B36, EO16, EO36, F17. Typical Applications Naval ships and submarines Oilfield applications

Tetra 14 is an Imidazoline/APQ/Tetra 241M (ADBAC) 70% active. It is a water/oil soluble corrosion inhibitor concentrate designed for pipeline applications.

V95X is a high performance general purpose copolymer fluoroelastomer (FKM). This material provides excellent compression set performance and good chemical resistance to phosphate ester, acids, aliphatic and aromatic hydrocarbons, brines, solvents and petroleum fluids.V95X offers superior high temperature capability over HNBR elastomers and provides outstanding O-ring sealing force retention over most other oil-heat resistant elastomers with the exception of FFKM perfluoroelastomers.Key Attributes Good resistance to Explosive Decompression Wide chemical resistance Excellent properties in high pressure applications High strength and extrusion resistant Typical Applications Low temperature and high pressure environments Exploration and drilling equipment Completion equipment Subsea valves and pumps Compressors O-rings, special profile and custom-made seals

Tetra 1172 is a water soluble filming amine/anti water foulant. It is a water soluble corrosion inhibitor for pipeline applications.

Flurocarbon 9500-75 is general-purpose 75-durometer fluorocarbon having excellent resistance to compression set and low cost.

RESOLCOAT 7080 HC GRIS / 7086 HC epoxy gelcoat is specially formulated for the production of structural composites parts exposed to fuel and other oil derivatives such as offshore oil drilling equipment, fuel tanks. This new generation system, optimized with excellent self leveling characteristics and excellent air release, is suitable for the manufacture of large composite parts.

Perlast® ICE G75LT offers a unique combination of excellent chemical resistance and low temperature performance. This perflouroelastomer material has been specifically developed to perform under extreme conditions, in temperatures as low as -46°C (-51°F).Perlast® ICE G75LT has been formulated to provide increased resistance to a broad range of chemicals by carefully controlling the molecular architecture. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in valves, pumps and mechanical seals.Ideal for use in exploration and completion applications and equipment operating or stored in sub-zero conditions. Perlast® ICE G75LT is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2.5m/8ft internal diameter) and custom shapes.Key Attributes Excellent low-temperature sealing capability Good high temperature resistance Low compression set Excellent chemical resistance to a broad range of chemicals Exceptional acid and amine resistance Good mechanical properties Typical Applications Aerospace - static O-rings Chemical processing - pumps & valves Mechanical seals Downstream refinery & petrochem equipment Cryogenic equipment Gas storage & transportation Oil & Gas - subsea equipment Completion tools Drilling tools (deepwater) Pipe connectors Pumps, valves & compressors

Understanding the demanding challenges in the oil and gas exploration and extraction industry, PPE offers the most technically advanced range of elastomer materials to meet the needs of sealing applications operating in the most severe conditions.Perlast® G92E is part of the EnDura® range of elite materials which have been specifically formulated for Explosive Decompression (ED) resistance in downhole, surface and subsea oilfield equipment.Perlast® G92E offers exceptional chemical compatibility, combined with excellent thermal and ED resistance.Key Attributes Excellent Explosive Decompression resistance. Tested to NACE TM0297 standard. Tested up to 28 MPa (4000psi) in nitrogen at 150°C (302°F) for 120 hours, and decompressed over 20 minutes: excellent results with no cracks or blistering. Exceptional resistance to methanol, sour gas, hot water, steam and oils, beyond that of conventional TFE/P (Aflas®) and FKM polymers. Excellent compression set provides long-term sealing capability and improved leak prevention thus minimizing equipment failure. Typical Applications High pressure environments Harsh chemical exposure Exploration and drilling equipment Completion equipment Subsea valves and pumps Compressors O-rings, T-section seals, special profiles and custom-made seals

Flurocarbon 9505-75 is general-purpose 75-durometer fluorocarbon having excellent resistance to compression set, and low cost and is brown in color.

Duralar® Sliding Wear Control coatings are specifically designed for use in applications that are subject to adhesive wear from the sliding motion of parts such as in reciprocating pistons and pumps. Many of these applications are found in oil and gas, automotive, and other heavy industries.

BS16 1200Н-76(200) has high natural strength, resistance to corrosive environment, long operation life and perfect electric insulation properties. It is applied in various areas.

Viton® 9066-75 is 75-durometer fluorocarbon having excellent resistance to compression set, and improved low-temperature flexibility (TR-10 value of -25°F) and meets the requirements of Aerospace Material Specification (AMS) R 83485.

Nitrile 2276-70 is incorporating an organic internal lubricant, 2276-70 seals are well suited for dynamic applications requiring low-friction materials; very high ACN content and low plasticizer level provide oil resistance; used on power steering reservoir caps.

Nitrile 2295-70 is Resists fuels rich in alcohol better than 4200-70 general-purpose nitrile seals; UL-listed for gasoline, diesel fuel, kerosene, naphtha and alcohol blends with up to 15% ethanol and methanol concentrations, high ACN content for very low swell in fuels; compound not recommended for hot air or ATF.

Z85L is a peroxide-cured, HNBR compound specially developed for service in low temperature applications.The high mechanical strength of Z85L provides excellent wear and abrasion resistant properties when used in dynamic applications.Its broad chemical resistance makes Z85L ideal for use with sour gas (H2S), crude oil, carbon dioxide and operating fluids including lubricators, drilling mud, oil additives and amine corrosion inhibitors.Key Attributes Good explosive decompression resistance Outstanding low temperature performance Excellent chemical resistance Superior H2S resistance compared with standard HNBR High mechanical strength Typical Applications Low temperature and high pressure environments Exploration and drilling equipment Cementing and completion equipment Subsea valves and pumps

Tetra 1200 is a water soluble corrosion inhibitor made from Tetra 12. It is a water soluble field strength corrosion inhibitor.

R-E-D Fume Oil & Gas - 104 OG is used to make high performance concrete in the oil and gas fields. It provides better flow for easier application, decreases permeability by increasing the resistance to ion penetration and potential gas migration, provides greater enhancement in compressive and flexural strengths, durability, modulus of elasticity, and pore structure, reduces viscosity and the set time of cement based materials.

Nitrile 0209-70 is a high ACN content with low plasticizer level provides excellent resistance to petroleum oils, automatic transmission fluid (ATF), and crude oil; formulated as a transfer-moldable variant of Parco general-purpose nitrile 4200-70 for producing thick cross-section custom molded parts; used extensively in oil tool seals and packing elements for pressures to 1,500 psi.

Flurocarbon 9167-60 is fluorocarbon seal designed for low-pressure applications requiring broad chemical resistance at low temperatures. Parco 9167-60 seals are suitable for static applications ranging from -65 to +450°F and dynamic applications ranging from -40 to +450°F.