Products

Our Calcined Clay - Hyper 200 R is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

Flowax 8 MW is a polymeric base homopolymer dispersing additive. Its low viscosity offers excellent wetting & dispersion effect. Its high melt and low viscosity offer excellent processability without damaging mechanical properties.

Hyper 60 DV is a calcined metakaolin produced by removing chemically bound water from the crystal structure. This calcined clay is then specially treated with organo silane of two different chemistry.

Zinkomer series of activators are uniquely developed products, thereby exhibiting better processability, lowering mixing time, improving dispersion, maintaining excellent rheo properties, heat aging properties, and mechanical properties. These products replace Zinc Oxide 100% as an activator for rubber. Last but not the least these are techno commercially and immensely beneficial as compared to conventional white seal and active products. Zinkomer is an innovative excellence which is a replacement to ZnO white seal. It is an efficient activator.

Hyper MP 33 a speciality calcined clay developed by calcining the purest and processed Kaolin.

Flowax 12 MW is a polymeric base homopolymer dispersing additive. Its low viscosity offers excellent wetting & dispersion effect. Its high melt and low viscosity offer excellent processability without damaging mechanical properties.

FMSIL® 112 R is a precipitated and modified amorphous silica product, uniquely developed to provide rapid incorporation in rubber matrix & excellent dispersion behavior. It offers high filler loading with favorable rheological and mechanical properties, excellent calendaring properties. It imparts a superior matting effect, surface appearance, and low tension & compression set with good aging properties. It also provides superior abrasion resistance.

Flowax 30 MW is a polymeric base homopolymer dispersing additive. It has low viscosity & high melt that offers excellent wetting & dispersion effect. It offers excellent processability without damaging mechanical properties.

K - STOFF T is a unique MPA for filled compounds, which offers excellent bonding, to filler & polymer with the enhanced flow & improved mechanical properties.

Flowax R 60 is a specialty hybrid modified wax and process additive for natural and synthetic rubber providing homogeneity in mixing of rubber compounds and better dispersion of pigment and filler in rubber mix . They improve scorch safety, cure rate and mechanical properties (tensile strength, elongation, hardness) of rubber compound . They also provide excellent weather resistance, UV resistance & ozone resistance.

Supermag 150 is an efficient activator that is highly active, and has high surface area MgO. It is produced under a special processing condition, thereby resulting in controlled particle size distribution. Supermag 150 is a high active magnesium oxide mainly used as an acid scavenger, scorch retarder, or curing agent during the cross-linking of several rubber compounds containing halogens or nitrile groups. Examples include chloroprene rubber and synthetics rubber (FKM, CIIR, BIIR, CPE).

Hyper 60 DM is a calcined metakaolin produced by removing chemically bound water from the crystal structure. This calcined clay is then specially treated with organo silane of two different chemistry.

Flowax 19 MW is a polymeric base homopolymer dispersing additive. Its low viscosity offers excellent wetting & dispersion effect. Its high melt and low viscosity offer excellent processability without damaging mechanical properties.

Our Calcined Clay - Hyperlink 66 is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.