Products

K - STOFF T is a unique MPA for filled compounds, which offers excellent bonding, to filler & polymer with the enhanced flow & improved mechanical properties.

Talc HFM 25 is sub-microns particle size platy talc with a high surface area & high aspect ratio to provide excellent barrier properties. During injection molding, these talcs act as ideal reinforcing fillers which provide greater stiffness & impact strength better dimensional stability. It is compatible with all thermoplastics & thermosets.

SR Filler is a functional additive. Its efficiency results from the unique irregular particle shapes, tight particle size distribution, bright & white color, and refractive index similar to the polyolefin resin.

Flowax R 60 is a specialty hybrid modified wax and process additive for natural and synthetic rubber providing homogeneity in mixing of rubber compounds and better dispersion of pigment and filler in rubber mix . They improve scorch safety, cure rate and mechanical properties (tensile strength, elongation, hardness) of rubber compound . They also provide excellent weather resistance, UV resistance & ozone resistance.

Zinkomer series of activators are uniquely developed products, thereby exhibiting better processability, lowering mixing time, improving dispersion, maintaining excellent rheo properties, heat aging properties, and mechanical properties. These products replace Zinc Oxide 100% as an activator for rubber. Last but not the least these are techno commercially and immensely beneficial as compared to conventional white seal and active products. Zinkomer is an innovative excellence which is a replacement to ZnO white seal. It is an efficient activator.

Phelmer C delivers low haze, high gloss, and clarity value in packaging grade flexible films without diminishing critical structural or mechanical properties. Phelmer C is used as cost-effective moderate to semi reinforcing fillers providing huge techno-commercial benefits in thermoplastics & thermoset compounding.

Hyper 60 DV is a calcined metakaolin produced by removing chemically bound water from the crystal structure. This calcined clay is then specially treated with organo silane of two different chemistry.

Flowax 12 MW is a polymeric base homopolymer dispersing additive. Its low viscosity offers excellent wetting & dispersion effect. Its high melt and low viscosity offer excellent processability without damaging mechanical properties.

Our Calcined Clay - Hyper 200 R is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

FMSIL® 112 R is a precipitated and modified amorphous silica product, uniquely developed to provide rapid incorporation in rubber matrix & excellent dispersion behavior. It offers high filler loading with favorable rheological and mechanical properties, excellent calendaring properties. It imparts a superior matting effect, surface appearance, and low tension & compression set with good aging properties. It also provides superior abrasion resistance.

Coating Clay 90 is submicron kaolin (China Clay) produced by a special milling technique that creates a optimized narrow particle size distribution. The platy nature of Coating Clay 90 in combination with its controlled particle size results in unmatched properties as a reinforcing agent in rubber application.

Flowax 19 MW is a polymeric base homopolymer dispersing additive. Its low viscosity offers excellent wetting & dispersion effect. Its high melt and low viscosity offer excellent processability without damaging mechanical properties.

Synthetic Barium Sulfate (Basofix) is an inspired innovation from 20 Microns Nano Minerals limited. It is specifically developed for the masterbatches & pigments application.

Phelmer G delivers low haze, high gloss, and clarity value in packaging grade flexible films without diminishing critical structural or mechanical properties. Phelmer G is used as cost-effective moderate to semi reinforcing fillers providing huge techno-commercial benefits in thermoplastics & thermoset compounding.

Hyper MP 33 a speciality calcined clay developed by calcining the purest and processed Kaolin.

Synsil VN3 is a precipitated and modified amorphous silica product uniquely developed to provide rapid incorporation in rubber matrix & excellent dispersion behavior. They offer high filler loading with favorable rheological and mechanical properties and excellent calendaring properties. It imparts a superior matting effect & surface appearance, low tension & compression set with good aging properties and provides superior abrasion resistance.

K - STOFF 440 is an oleochemical wetting & dispersing additive that offers excellent wetting characteristics and does not allow to form of the agglomerates of pigments particles in color MB application.

RBR Clay belongs to 20 Microns' hard and soft clay range products which act as a reinforcing filler with huge techno-commercial benefits in rubber compounding formulation.