Products

ADDAPT BioWet 150R is a solvent free, ready biodegradable wetting agent which improves the Wet-Edge (open time) and Water Retention. It is a Polyhydroxy - Amide. The product is EINECS registered.

ADDAPT Foamstop WS 17 is a highly effective, complete water-soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components. FDA-no - 21 CFR and 173.340

ADDAPTOL™ DB is a non-VOC oxygenated solvent for use as a coalescing agent in waterborne systems and tail solvent in Solvent borne systems. It is a proprietary mixture of branched esters of dibasic acids.

ADDAPT WaxMul WM 120 is a wax emulsion based on a balanced blend of Polyethylene and Paraffin waxes giving buffable films with excellent gloss and water repellent properties. It is an emulsion of Polyethylene and Paraffin waxes in water.

ADDAPT Foamstop VF 35N is a highly effective Foam Control Agent for low VOCphysical Emulsion systems based on PVAC, Styrene/Acrylics or pure Acrylics. It is a proprietary blend of oils with PAG’s and surface active components - MOSH/MOAH free - All constituents comply with the FDA regulation (incidental contact with foodstuff). FDA regulation: #173.340

ADDAPT WaxMul C 325 is a wax emulsion based on refined Type 3-Carnauba wax. This Carnauba wax gives excellent Scratch Resistance, Lubrication, Release & Anti-Block. It is an emulsion based on T3-type Carnauba wax in water. FDA Status - approved under 21 CFR 175.105, 175.300, 175.320, 176.170 and 176.180

ADDAPT WaxMul WM 45 is a very high melting point PP-wax emulsion giving excellent surface hardness and blocking resistance. It is an emulsion of Polypropylene wax in water.

ADDAPT BioWet 175R is a solvent free, biodegradable wetting/leveling agent which improves Open time and Flow in Textured masonry coatings and Plasters. It is a Polyhydroxy - Amide. The product is EINECS registered.

ADDAPT CODIS 95 is an effective Co-Dispersant for (mineral) pigments and fillers. It is also suitable for colorants and solvent based Alkyd paints. ADDAPT CODIS 95 is a proprietary blend of Alkanol-amines in water. All constituents are EINECS registered and in compliance with the detergent directive EG/648/2004

ADDAPT WaxMul WM 15 is a high melting point PE-wax emulsion with excellent resistance to yellowing. It is an emulsion of Polyethylene wax in water.

ADDAPT BioWet 35 is a solvent free, ready biodegradable wetting/leveling agent for aqueous systems such as cleaning agents and coatings/lacquers on wood substrates. ADDAPT BioWet 35 exhibits good dynamic and static surface tension values. A blend of PolyAlkylene Glycols, dispersants and Polyhydroxy - Amide. The ingredients are EINECS registered.

ADDAPT Foamstop 666K is a water soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components. All constituents are EINECS registered and comply with the FDA regulation. (incidental contact with foodstuff). FDA-no: 21 CFR and 173.340.

ADDAPT WaxMul WM 110 is a wax emulsion based on a balanced blend of Polyethylene and Paraffin waxes giving water repellent properties as well as a matting effect. It is an emulsion of Polyethylene and Paraffin waxes in water.

ADDAPT WaxMul C 125 is a wax emulsion based on refined Type 1-Carnauba wax. This Carnauba wax gives excellent Scratch Resistance, Lubrication, Release & Anti- Block. It is an emulsion based on T1-type Carnauba wax in water. FDA Status - approved under 21 CFR 175.105, 175.300, 175.320, 176.170 and 176.180

ADDAPT WaxMul WM 25 is a high melting point PE-wax emulsion giving excellent abrasion resistance and also improves the (wet) scrub resistance of Paints and Inks. It is an emulsion of Polyethylene wax in water.

ADDAPT Foamstop SL 30 is a highly effective and versatile Foam Control Agent. It is extremely stable both on storage and in the final system. It is a Silicone Emulsion containing minerals and fatty acid based emulsifiers

ADDAPT Foamstop 400F is a highly effective universal Foam Control Agent for water-based and solvent-based systems. Proprietary blend of Poly-Alkylene Glycols and Surface-Active components.

ADDAPT AS 400 is a Hydrophobe Modified Alkali Soluble Emulsion rheology modifier. It is an acrylic copolymer based emulsion in water

ADDAPT BioWet P 77 is a VOC free, Dispersant for Pigments and Quartz as well as Wetting Agent for aqueous systems. A blend of multi-alcohols and polymers in water. The components are EINECS registered.

ADDAPT BioWet P 80 is a VOC free, Universal Additive for production of (textured) masonry coatings, renders (including silicone/silicate types) and putties. A blend of multi-alcohols and polymers in water.

ADDAPT WaxMul WM 35 is a high melting point PE-wax emulsion giving very good wet scrub resistance of Paints and improves the buffability of Floor polishes. It is an emulsion of Polyethylene wax in water.

ADDAPT Foamstop 100N is a complete water soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components All constituents are EINECS registered and comply with the FDA regulation.

ADDAPT Foamstop 400N is a highly effective, complete water-soluble Foam Control Agent. It is a proprietary blend of Polyalkyleneglycols and surface-active components All constituents are EINECS registered and comply with the FDA regulation.