Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
Properties
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Physico-Chemical Properties
- Fire Resistance
| Value | Units | Test Method / Conditions | |
| Charpy Notched Impact Strength (at -20°C) | 6 | kJ/m2 | ISO 179-1/1eA |
| Charpy Notched Impact Strength (at 23°C) | 15 | kJ/m2 | ISO 179-1/1eA |
| Charpy Unnotched Impact Strength (at -20°C) | 18 | kJ/m2 | ISO 179-1/1eU |
| Charpy Unnotched Impact Strength (at 23°C) | 25 | kJ/m2 | ISO 179-1/1eU |
| Elongation at Break | 7 | % | ISO 527-2/1A |
| Flexural Modulus | 1700 | MPa | ISO 178 |
| Izod Notched Impact Strength | 15 | kJ/m2 | ISO 180/1A |
| Shore D | 61 | — | ISO 868 |
| Stress at Break | 15 | MPa | ISO 527-2/1A |
| Stress at Yield Point | 20 | MPa | ISO 527-2/1A |
| Value | Units | Test Method / Conditions | |
| Heat Deflection Temperature | 75 | °C | ISO 75-2/Af |
| Melting Point | 165/168 | °C | ISO 11357-3 |
| Vicat Softening Point | 140 | °C | ISO 306/A50 |
| Value | Units | Test Method / Conditions | |
| Post-Shrinkage | 0.71 - 1.44 | % | Méthode interne |
| Shrinkage | 0.69 - 1.43 | % | Méthode interne |
| Value | Units | Test Method / Conditions | |
| CTI | min. 600 | V | CEI 60112 |
| Value | Units | Test Method / Conditions | |
| Density | 1 | g/cm3 | ISO 1183-1 Méthode A |
| MVI (190°C-2.16kg) | 9 | cm3/10min | ISO 1133-1 |
| Value | Units | Test Method / Conditions | |
| Falling Ball Test | 110 | °C | CEI 60695-10-2 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Note
- The LOI measures are obtained through standard specimens of type I, with ignition of type A.
- The values indicated above have been realized with standard specimens which are conditionned according to ISO 291. These datas must be considered as indicative values, but in no case as minimum values. Moreover, the design of the mold/die, the processing conditions and the color may have an impact on the properties.
- New Development with Various Natural Fibers
Our Equipment Allows us to Test And Develop Formulations Based an a Wide Variety of Natural Fibers
30% Various Natural Fibers in PP matrix
Commercial Range of Products
Note: Based on our R&D Expertise, We Developed a range of Commercial Products, Matching Glass and Mineral Compounds Performances