Products

Moulex® 154 NS is internal mold release agent. It improves external release agent performances.

Moulex® 100 is free of silicone oil, external semi permanent release agent. Offers high gliding effect. It possesses highly abrasive resistant properties. Ready to be used and allows obtaining a thin release coating without transfer to molded parts. Due to its composition it also reduces mold fouling.

Moulex® EGDMA 70 by Additek is a vulcanization co-agent on carrier silica. It offers increased mechanical properties with peroxide cured compounds. It exhibits increased resistance to solvents.

Moulex® WD8 is external semi permanent water based release agent. It exhibits high gliding effect. It possesses highly abrasive resistant.

Moulex® 155 PU is internal mold release agent. It reduces the consumption of external release agent and provides reduced mold fouling.

Moulex® 365GL is external solvent based semi-permanent mold release agent.

Moulex® TPR is a semi-permanent water based release agent. It possesses high adhesivness on molds.

Moulex® TMPTMA 70 by Additek is a vulcanization co-agent on carrier silica. It offers increased mechanical properties with peroxide cured compounds. It exhibits increased resistance to solvents. Provides improved compression set.

Calsec® FE contains micronised calcium hydrooxide. It is used in fluoroelastomers crosslinking.

Moulex® 250 is internal mold release agent. Improves the external release agent performances. Reduces external release agent applications and the mold fouling.

Moulex® 77PD 70 is antiozonant on carrier silica for natural and synthetic rubber.

Moulex® 31GS3 acts as mold release agent. It is used in resin transfer molding.

Moulex® 352 is internal mold release agent. It also acts as wetting agent.

Moulex® RI 04 is a processing aid for all types of elastomers. It increases filler dispersion and offers reduced mixing time. It improves molding properties.

Calsec® UF contains micronised calcium oxide. It acts like a dessicant and avoids porosity.