Products

VAC-PAK® UHT 750 3 is a amber polyimide film developed for use with high temperature thermoplastic matrix materials up to 800°F (426°C).

VAC-PAK® HS 800 is gold, co-extruded PA film which is ideal for high temperature/pressure applications where softness and workability are essential, suitable for use up to 375°F (191°C).

VAC-PAK® HS6262 is a blue, modified nylon film with excellent elongation and heat aging properties for use up to 450°F (232°C), approved on various aerospace specifications.

VAC-PAK® HS8171 is a green high temperature (400°F / 204°C) nylon tape with a pressure sensitive, rubber-base adhesive. High elongation properties provide a high degree of conformability, and high stretch and thinness offer excellent conformability and clean, sharp edges.

Aerovac A2500 is a pink, modified PMP polymer film, with excellent release characteristics, suitable for a wide range of parting film applications up to 400°F (204°C).

VAC-PAK® HT 620 is a olive colored, high elongation film produced from PTFE resin with a chemically conditioned side to ensure good adhesion for use up to 620°F (326°C).

Aerovac POLYIFILM is a amber polyimide tape with silicone adhesive, ideal for high temperature applications up to 500°F (260°C).

Aerovac A2200 is a clear orange, modified PE polymer film ideal for use in resin infusion and compatible with epoxy, polyester and vinylester resins up to 248°F (120°C).

Aerovac VB-3 is Beige cast PTFE film with high elongation at elevated temperatures, up to 600°F (315°C) and a chemical etch on one side to ensure good adhesion.

VAC-PAK® HS 8171 6/66 is a light blue-green, PA co-polymer film which remains pliable after extended cure cycles. Ideal for advanced composite fabrication and other high temperature/pressure cures up to 400°F (204°C).

Aerovac MR-FILM is a red/beige PTFE film with high elongation and excellent yield up to 600°F (315°C), which releases well from even the most aggressive resin systems.

Aerovac A5000 is a redwhite or violet FEP film with high elongation and excellent release characteristics up to 500°F (260°C), approved by numerous OEMs.