Products

AGC Chemicals Americas, Inc. Fluon+™ FC 100 BL5-730 (311100576) is a blue pigmented PTFE product designed for gasket and seal applications. It is supplied in dry powder form and is suitable for use when chemical and thermal resistance of PTFE is required with a blue pigmented appearance.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50LM is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 100N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 158 (310999302) is a polyphenylene sulfide-filled PTFE compound designed for use in seal applications. This compound is supplied in dry powder form. Polyphenylene sulfide is added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN) is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 40N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon+™ FC 105 Billet (310105580) is a 25% glass-filled, PTFE product designed for use in large billet molding. It is supplied in dry powder form and improves wear properties, compressive strength, and creep resistance of PTFE without sacrificing chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 474 SPL (340474062) is a 5% glass and 5% molybdenum disulfide filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Glass fibers and molybdenum disulfide are added to PTFE to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 482 SPL (340482030) is a bronze powder and molybdenum disulfide filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of bronze powder and molybdenum disulfide improves the thermal and electrical conductivity, as well as the wear properties and deformation resistance of PTFE, without compromising the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 MIN SPL (340454463) is a 15% wollastonite-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Wollastonite fibers are added to PTFE to improve its wear properties, abrasion resistance, compressive strength, and creep resistance, without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 7 PI FF (340461400) is a polyimide-filled PTFE product designed for use in seal applications. It is supplied in round pelletized form, with pellets ranging in size from approximately 350 to 800 microns. Polyimide is added to PTFE to improve its wear properties and abrasion resistance in non-lubricated applications, while maintaining the chemical and thermal resistance of the polymer. This compound results in less wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ FC 50 ST ST (310154081) is a 50% stainless steel filled PTFE product designed for use in high wear and load-bearing applications. This compound is supplied in dry powder form and can be processed using compression molding equipment to mold thick-walled parts. Stainless steel is added to PTFE to improve wear properties and load bearing capability without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ mPPS SB-1030 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPPS SB-1030 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 108 (310108001) is a 40% glass-filled PTFE product designed for use in gasket and seal applications. It is supplied in dry powder form and improves wear properties, compressive strength, and creep resistance of PTFE without sacrificing chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 PI (310999107) is a 15% polyimide-filled PTFE product supplied in dry powder form. Polyimide is added to PTFE to improve its wear properties and abrasion resistance in non-lubricated applications, without sacrificing the chemical and thermal resistance of the polymer. This compound results in less wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ FC 433 SPL (340433001) is a 15% soft carbon-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. Soft carbon is added to PTFE to improve the wear properties, compressive strength, and creep resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 458 (340999102) is a polyphenylene sulfide-filled PTFE product designed for use in seal applications. This compound is supplied in round, pelletized form, with pellets ranging in size from approximately 350-800 microns. Polyphenylene sulfide is added to improve the wear properties, abrasion resistance, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FL1680 lubricant is a white, finely divided, low molecular weight powder manufactured from virgin PTFE feedstock. It has an average particle size of 11 microns, a narrow particle size distribution and low surface area. FL1680 is virtually immune from chemical attack, is water repellent, has good electrical insulation properties, a wide working temperature range and has excellent weathering and aging characteristics.

AGC Chemicals Americas, Inc. Fluon+™ FC444.0 (340444004) is a 40% bronze filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form. These pellets range in size from approximately 350 - 800 microns. Bronze powder is added to PTFE to increase the thermal and electrical conductivity and to improve the wear properties and deformation resistance without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ mPPS SB-1010 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPPS SB-1010 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 168 (310168002) is a glass fiber and graphite filled PTFE product. This compound is supplied in dry powder form. Glass fibers and graphite powder are added to improve the wear properties, compressive strength, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon+™ FC 135 (310135025) is a 25% carbon-filled PTFE product supplied in dry powder form. It improves wear properties, compressive strength, and creep resistance without sacrificing chemical and thermal resistance of the polymer. It can be processed using compression molding equipment to mold thick-walled parts.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 MIN (310154464) is a 15% wollastonite-filled PTFE product. This compound is supplied in dry powder form. Wollastonite fibers are added to PTFE to improve its wear properties, abrasion resistance, compressive strength, and creep resistance without sacrificing the chemical and thermal resistance of the polymer. Additionally, wollastonite is an FDA compliant filler.

AGC Chemicals Americas, Inc. Fluon+™ FC 433.3 (340433300) is a 15% graphitized carbon fiber-filled PTFE product designed for use in seal applications. The compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The addition of graphitized carbon fibers to PTFE improves the wear properties, compressive strength, hardness, and creep resistance of the polymer without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 404 (340404031) is a PTFE compound reinforced with 20% glass fibers. This material is supplied in round pellets, with a size range of 350-800 microns. The addition of glass fibers improves the wear resistance, compressive strength, and creep resistance of PTFE, while maintaining its chemical and thermal resistance. It is designed for use in seal applications.

AGC Chemicals Americas, Inc. Fluon® PFA P-62XP (perfluoroalkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA P-62XP has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethylene (PTFE), yet can be processed by conventional extrusion, injection molding, blow molding, and transfer molding techniques. This unique material can be used over a wide range of temperatures (-200°C to 260°C). It is available as a 1/8 inch pellet.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 442 (340999443) is a polyphenylene sulfide and graphite filled PTFE compound designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350 - 800 microns. The polyphenylene sulfide and graphite fillers are added to improve the wear properties, compressive strength, and creep resistance of PTFE without sacrificing its chemical and thermal resistance.

AGC Chemicals Americas, Inc. Fluon+™ FC 482 SPL II (340482045) is a PTFE product filled with a combination of bronze powder and molybdenum disulfide. It is designed for use in seal applications and is supplied in round pelletized form with a size range of 350 - 800 microns. The added fillers increase the thermal and electrical conductivity, as well as improve the wear properties and deformation resistance of the PTFE without compromising its chemical and thermal resistance.