Products

Airex Rubber Products A-9660 is a 65-durometer silicone compound that has a minimum tensile strength of 1000 PSI and a minimum elongation of 350%. It is capable of heat resistance for extended period of time within the temperature range of -50 to 450 degrees F. It may be used for short periods of time at temperatures as low as -100 degrees F and as high as 600 degrees F. A-9660 also possesses excellent release properties, and it is used extensively in hot wax processes.

Airex Rubber Products A-2620 Water Resistant Rubber is specially formulated for use in applications involving continuous and periodic immersion in both hot and cold water.

Airex Rubber Products PFR-94 is a compound is a 75-durometer perfluoroelastomer which will resist nearly all chemical reagents, including organic and inorganic acids, alkalines, ketones, esters, alcohols and fuels. At the same time, it offers outstanding high temperature resistance (300 degrees C) which makes it ideal for o-rings, seals, diaphragms and other high quality parts.

Airex Rubber Products A-7350 Silicone Compoundis a 35 shore A durometer silicone compound with a minimum tensile strength of 650 PSI and a minimum elongation of 350%. It is capable of resisting, for short periods, temperatures from -100 to 600 degrees F. It should, however, be considered serviceable at temperatures of -50 to 400 degrees F.

Airex Rubber Products A-6040 is a urethane rubber compound with excellent resistance to vibratory finishing and wet media abrasion operations.

Airex Rubber Products A-48003 is an FDA-Approved 80-durometer nitrile rubber compound that meets-the requirements of CFR 177.2600 for rubber articles that intended for repeated use.

Airex Rubber Products A-4733 is an FDA-Approved grit blast elastomer formulation that meets the requirements of CFR 177.2600 for rubber articles that are intended for repeated use. In addition, this compound has proven to be non-toxic in cytotoxicity testing. It is a 70-durometer compound with a minimum tensile strength of 3200 PSI and a minimum elongation of 400%. Intended for the medical industry where high abrasion resistant masking is required.