Products

Akron Coating and Adhesives ACA-20-658 is a high peel adhesion, high shear resistance and high tack heat stabilized and heat resistant rubber-resin type pressure sensitive adhesive. Its cross-linking capability can be used to further enhance heat resistance. All components of ACA 20-658 conform to the requirements of 21CFR 175.105 FDA.

Akron Coating and Adhesives ACA-20-649 is a pressure sensitive adhesive composed primarily of synthetic polymers and avoids natural rubber latex. The polymer is crosslinked to enhance chemical and heat resistance. Heat and perspiration do not affect its high tack and shear resistance. A 1 mil dry adhesive film is recommended as a starting point for testing. Rough topography such as fabrics may require greater adhesive thickness.

Akron Coating and Adhesives ACA-10-100 is a water based matte black coating which exhibits heat resistance to over 500°F without smoking, blistering, or the loss of adhesion or flexibility. The black coating is intended for application to 1 or 2 mil soft aluminum foil where intense infrared heat from Klieg lights or space heaters is encountered. Further, the coating is a potential candidate for other high temperature applications. It is advisable to test for suitability for the specific application. A curing agent must be stirred into the coating immediately prior to coating. The pot life is about 3 days. Viscosity reduction may be accomplished by the careful addition of water.