Products

Akron Coating and Adhesives ACA-10-101 is a water-borne, matte black, chemically resistant coating designed especially for resistance to exterior exposures encountered in automotive applications. A crosslinking agent must be added prior to this coating in order to achieve the desired chemical resistance. The pot life after cross-linker addition is three days. The base polymer for this application is an acrylate block copolymer. Cross-linking is via pendant carboxyl groups, which also enhance the metal adhesion.

Akron Coating and Adhesives ACA-10-414 is Flexible non-conductive coating for metals. A water based flexible non-conductive coating for spray application to electronic parts, and for gravure coating onto metals as insulation of parts in electronic assemblies.

Akron Coating and Adhesives ACA-10-110 coating is a hydroscopic material that may be applied to aluminum foil. The coating may also absorb and transfer other small molecules similar to water such as aldehydes, alcohols, ketones or amines away from the working atmosphere. ACA 10-110 primarily uses water dispersions with a small amount of isopropyl alcohol in the mix to serve as a coalescing agent. The isopropyl alcohol (boiling point 82°C) evaporates in the oven with the water and is not present in the dry, coated film.

Akron Coating and Adhesives ACA-10-413 is a water-borne heat resistant electrically resistant coating designed for application to stainless steel and other metals. ACA 10-413 should be evaluated where electrical insulation is required on metal foil and where considerable heat resistance is also required. Apply 0.3 to 0.5 mils of coating onto the metal foil in order to enjoy a pinhole free coating. If pinholes do appear, it may be necessary to apply a second thin coating to fill the pinholes.

Akron Coating and Adhesives ACA-10-102 is a waterborne, semi-gloss, black, chemically-resistant coating. A cross-linking agent must be added prior to this coating in order to achieve the desired chemical resistance. The pot life after cross-linker addition is three days. The base polymer for this application is an acrylate block copolymer. Cross-linking is via pendant carboxyl groups, which also enhances the metal adhesion.

Akron Coating and Adhesives ACA-20-527 is a waterborne pressure sensitive adhesive. This pressure sensitive adhesive is very high in solids to facilitate rapid drying during the application process. The dry adhesive exhibits high sheer resistance, resistance to high temperatures and sufficient tack to facilitate rapid assembly.

Akron Coating and Adhesives ACA-10-111 is a Desiccant coating for metals. Our mid level formula desiccant coating, with improved water resistance as compared to our ACA-10-110 formulation.