Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Aldo Products Company Company Logo

ALDOCOAT 395

1 of 5 products in this brand
ALDOCOAT 395 is a one-part silicone elastomeric coating specifically designed for use in low slope roofing applications. Once cured this liquid applied silicone coating provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. It provides greater UV protection than similar silicone coatings and offers increased resistance to moisture penetration. It provides excellent long term protection through exceptional weatherability properties.

Chemical Family: Silicon-based Compounds

Product Type: 1K (1 component) Coating, Top Coat

Application Area: Roofing Membranes

Application Method: Brush, Roller, Spray

Compatible Substrates & Surfaces: Metal, Plastics, Polyurethane

Features: Durable, Excellent Substrate Adhesion, Flexible, Good UV Protection, Good Weather Stability, High Moisture Resistance, High Reflectivity, Long Term Protection

Technical Data SheetSafety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Silicon-based Compounds

Product Type

1K (1 component) Coating,

Top Coat

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Paints & Coatings

Protective Coatings,

Top Coats

Features & Benefits

Ready-to-Use Product Features

Durable,

Excellent Substrate Adhesion,

Flexible,

Good UV Protection,

Good Weather Stability,

High Moisture Resistance,

High Reflectivity,

Long Term Protection

Applications & Uses

Application Area

Roofing Membranes

Application Method

Brush,

Roller,

Spray

Compatible Substrates & Surfaces

Metal,

Plastics,

Polyurethane

Uses
  • ALDOCOAT 395 was specifically developed as a protective coating for EPDM, TPO, PVC single ply membranes, smooth BUR, granulated modified bitumen and sprayed-in-place polyurethane foam roofing.
  • ALDOCOAT 395 is also used as a top coat over ALDOCOAT 384BR.
  • Polyurethane in the FM approved low slope system. With excellent adhesion to all substrates and exceptional durability, ALDOCOAT 395 is proven to provide excellent solar reflectivity, UV protection and long term waterproofing performance.
Application Instructions
  • ALDOCOAT 395 may be applied by medium nap rollers, soft brushes or conventional airless spray equipment.
  • Apply ALDOCOAT 395 only to clean, dry, sound surfaces free of loose particles or other foreign matter. For best results, ambient temperature should be between 50 - 80 °F. Higher temperatures will shorten the cure time and working time for proper application of granules before the material has skinned. Lower temperatures will lengthen the skin over, tack free and ultimate cure time. Sudden temperature declines may also result in dew formation on surfaces, which can prevent adhesion development.
  • For best results, relative humidity should be above 20%. Lower humidity will slow the cure time significantly.
  • Apply ALDOCOAT 395 at the rate of 1.5 gallons per 100 sq.ft. per coat.
  • Minimum dry mil thickness shall be above 25mils.
Clean Up Solvent

Mineral Spirits

Properties

Color

Grey,

White

Typical Properties
ValueUnitsTest Method / Conditions
Total Solids (Volume)67.0%ASTM D2697
Weight10.3lbs/gal-
Flash Point106.0°F-
Viscosity6000 - 9000cPsBrookefield
Elongation (Initial)318.0%-
Hardness55.0-Shore A
Tensile Strength500.0-psi
Permeability2.1-perms
Service Temperature-50 to 200-º F
ThinnerNot Recommended--
Solar Reflectance87.0-%
Thermal Emittance88.0-%
Cure Time (Dry to Touch)6.0-Hours
Cure Time (Tack Free)2.0-Hours
Cure Time (Skin Over)30.0-min

Storage & Handling

Shelf Life
6 Months (40°F - 90°F)
Storage & Handling
  • Avoid contamination in sealed containers.
  • Store away from heat, and sources of ignition.