Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Application Area
- Uses
- ALDOCOAT 400 is the ideal choice for metal roofs, BUR and single ply restoration.
- This product is ideal for use over spray polyurethane foam and metal decks.
- The thixotropic nature of ALDOCOAT 400 permits high build coverage, even on rough, textured or vertical surfaces without pinholing or sagging.
- It also has excellent adhesion to a variety of other substrates, such as asphalt, primed wood, primed metal, concrete and masonry.
- Ponding water conditions are to be avoided. Please contact our Technical Service Department for primer recommendations for application over rusted surfaces.
- Application Instructions
- ALDOCOAT 400 may be applied by airless spray equipment at a minimum rate of 1 - 2 gallons per square per coat.
- Airless spray is the most efficient application method for larger projects. Brushes and rollers may be used for detail work such as edge termination, filling of voids, pinholes and small cracks.
- Apply ALDOCOAT 400 only to clean and dry sound substrates free of loose particles or other foreign matter.
- ALDOPRIME 708 Acrylic may be used to enhance adhesion over aged spray polyurethane foam roofs.
- Do not apply product when ambient temperature falls below 50°F.
- Clean Up Solvent
Soap & Water
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Total Solids (Weight) | 62 - 68 | % | ASTM D1644 |
| Total Solids (Volume) | 50 - 56 | % | ASTM D2697 |
| Weight | 11.9 - 12.3 | lbs/gal | - |
| Viscosity | 7000 - 13000 | cPs | - |
| Elongation | 239.0 | % | ASTM D2370 |
| Hardness | 45.0 | - | ASTM D-2240 (Shore A) |
| Tensile Strength | 278.0 | psi | ASTM D2370 |
| Permeability | 6.5 | perms | ASTM D1653 |
| Service Temperature | -40 to 200 | º F | - |
| Solar Reflectance | 86.0 | % | - |
| Thermal Emittance | 88.0 | % | - |
| Cure Time (Dry to Touch, 75ºF) | 4.0 | Hours | - |
| Cure Time (Tack Free) | 12.0 | Hours | - |
| Cure Time (Re-Coat) | 12 - 24 | Hours | - |
| Salt Spray (3800 Hours) | No Effect | - | ASTM G-117 |
| Accelerated Weatherability | Pass, No Cracking | - | ASTM D4798 |
Regulatory & Compliance
- Regulatory & Compliance
ALDOCOAT 400 has passed ASTM D6083, is MiamiDade and Florida Building code approved, Cool Roof Rating Council (CRRC) and Energy Star rated and CA Title 24 Approved.
Storage & Handling
- Shelf Life
- 12 Months (45°F - 80°F)