Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Compatible Substrates & Surfaces
- Uses
ALDOCOAT 730 is recommended as a clear protective coating for a variety of surfaces which include but are not limited to fiberglass surfaces, such as skylights, masonry, concrete, plaster, brick, block, wood, stucco or architectural panels where a clear coating product is desired.
- Application Instructions
- ALDOCOAT 730 may be applied by medium nap rollers, soft brushes or conventional airless spray equipment.
- Apply ALDOCOAT 730 only to clean, dry, sound surfaces free of loose particles or other foreign matter.
- Preparation of substrate may require cleaning, grinding or sand blasting to achieve the proper condition before application.
- Apply ALDOCOAT 730 at the rate of 1 to 2 gallons per 100 sq.ft. depending surface and / or condition.
- Clean Up Solvent
Water
- Product Application
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Total Solids (Weight) | 43.5 | % | ASTM D1644 |
Total Solids (Volume) | 40.0 | % | ASTM D2697 |
Weight | 8.5 - 8.9 | lbs/gal | - |
Viscosity | 1500 - 2500 | cP | - |
Elongation | 300.0 | % | - |
Hardness | 60.0 | - | Shore A |
Tensile Strength | 1400.0 | - | psi |
Storage & Handling
- Shelf Life
- 12 Months (40°F - 90°F)
- Storage & Handling
- ALDOCOAT 730 is a water based acrylic coating that will freeze and become unusable at temperatures below 32°F.
- Protect from freezing during shipment and storage.
- Do not store material at temperatures below 45°F.
- Do not apply ALDOCOAT 730 when ambient air and substrate temperatures fall below 50°F or when inclement weather is imminent.