Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Suggested Applications
EBECRYL® 4685 is designed for use in the formulation of UV/EB energy curable coatings for application by roller coating, spraying and curtain coating on wood, cork, furniture, paper, parquet plastics and film.
Properties
- Physical Properties
- Typical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Acid Value | max. 1 | mgKOH/g | — |
| Density | 1.12 | g/cm³ | — |
| Flash Point | min. 100 | °C | — |
| Value | Units | Test Method / Conditions | |
| Color | max. 150 | Pt-Co | — |
| Viscosity (60°C) | approx. 4500 | cP/mPa·s | — |
| Value | Units | Test Method / Conditions | |
| Tensile Strength | 2480 (17) | psi (MPa) | — |
| Elongation at Break | 1.1 | % | — |
Safety & Health
- Precaution
- Before using EBECRYL® 4685, see the Safety Data Sheet (SDS) forinformation on the identified hazards of the material and therecommended personal protective equipment and procedures.x
Storage & Handling
- Precaution
- Care should be taken not to expose the product to high temperatureconditions, direct sunlight, ignition sources, oxidizing agents, alkalis oracids. This might cause uncontrollable polymerization of the productwith the generation of heat. Storage and handling should be in stainlesssteel, amber glass, amber polyethylene or baked phenolic linedcontainers. Procedures that remove or displace oxygen from thematerial should be avoided. Do not store this material under an oxygenfree atmosphere. Dry air is recommended to displace material removedfrom the container. Wash thoroughly after handling. Keep containertightly closed. Use with adequate ventilation.See the SDS for the recommended storage temperature range for