Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Suggested Applications
Formulated UV/EB curable products containing EBECRYL® 6203 may be applied by direct or reverse roll.
EBECRYL® 6203 is recommended for use in :- Coatings on rigid and flexible plastics
- Wood coatings
- Screen inks
- Low gloss coatings
- Conformal coatings.
Properties
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.1 | g/cm³ | — |
| DPGDA Content | 30 | % wt | — |
| Functionality (Theoretical) | 2 | — | — |
| Molecular Weight (Theoretical) | 1500 | — | — |
| Polymer Solids Content | 70 | % wt | — |
| Value | Units | Test Method / Conditions | |
| Color | max. 1 | Gardner | — |
| Hopler Viscosity (25°C) | 6500 | mPa.s | — |
Safety & Health
- Precaution
- The following is a summary of the precautions to be taken when handling this product. Please refer to the Safety Data Sheet for further details.The toxicological properties of this material have not been fully determined. Products of this type canbe expected to be eye and skin irritant and have the potential to causesensitization or other allergic responses. Appropriate precautions shouldbe taken to avoid eye and skin contact and to avoid inhalation of theaerosols or vapors. Consult the relevant Safety Data Sheet forappropriate handling procedures and protective equipment prior to usingthis or any other material referred to in this bulletin.See Safety Data Sheet for emergency and first aid procedures.
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 2 years
- Storage and Handling
- Care should be taken not to expose radiation curable products to temperatures exceeding 40°C for prolonged periods or to direct sunlight. This might cause uncontrollable polymerization of the product with generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Do not store this material under an oxygen free atmosphere. Use dry air to displace material removed from the container. This material should not be stored for more than 2 years.