Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Cure Method
- Coating Type
- Suggested Applications
EBECRYL® 780 is recommended to be used in spray formulation in combination with other UV curable materials such as monomers or oligomers.
EBECRYL® 780is recommended for use in:- Topcoat for vacuum metallized plastics in cosmetic and film applications.
Properties
- Typical Properties
- Cured Properties
Value | Units | Test Method / Conditions | |
2-methoxy-1-propanol Content | 30 | % wt | — |
Acid Value | max. 140 | mgKOH/g | — |
Color | max. 2 | Gardner | — |
Functionality (Theoretical) | 8 | — | — |
Resin | 70 | % wt | — |
Density (25°C) | 1.12 | g/ml | — |
Viscosity (25°C) | 15000 | cP/mPa·s | — |
Value | Units | Test Method / Conditions | |
Elongation at Break | 0.2 | % | — |
Glass Transition Temperature | 140 | °C | — |
Tensile Strength | 493 (3.4) | psi (MPa) | — |
Young's Modulus | 329236 (2270) | psi (MPa) | — |
Safety & Health
- Precaution
- Before using EBECRYL® 780, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Care should be taken not to expose the product to high temperature condition direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation. Ebecryl 1200 contains a flammable or combustible liquid and vapor. Consult the SDS for additional storage and handling recommendations. See the SDS for the recommended storage temperature range for EBECRYL 780. Please refer to the allnex Guide to Safety and Handling of Acrylate Oligomers and Monomers for additional information on the safe handling of acrylates. Measured on a 80 micron EB-cured film; stress-strain testing was carried out at 23°C,50% relative humidity, 50 mm/min.