Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Suggested Applications
Formulated UV/EB curable products containing EBECRYL® 854 may be applied by direct or reverse roll coating methods.
EBECRYL® 854 isrecommended for use in:- Parquet floor applications
- Furniture coatings
- Plastic coatings
- Resilient flooringx
Properties
- Physical Properties
- Cured Properties
| Value | Units | Test Method / Conditions | |
| Acid Value | max. 20 | mgKOH/g | — |
| Color | max. 2 | Gardner | — |
| Density (25°C) | 1.19 | g/cm³ | — |
| Functionality (Theoretical) | 3 | — | — |
| Oligomer | 100 | % wt | — |
| Viscosity (25°C) | 20000 - 40000 | mPa.s | — |
| Value | Units | Test Method / Conditions | |
| Glass Transition Temperature | 53 | °C | — |
| Tensile Strength | 23 (3335) | MPa (psi) | — |
| Elongation At Break (UV cured 80 μm thick films) | 7.5 | % | — |
| Young Modulus (UV cured 80 μm thick films) | 800 | Mpa | — |
Safety & Health
- Precaution
- Avoid contact with eyes and skin. Direct contact with this material maycause serious eye irritation and skin irritation.
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage and Handling
- Before using EBECRYL® 854, consult the Safety Data Sheet for additional information on hazards, handling procedures, and recommendedprotective equipment. The recommended storage temperature range for EBECRYL® 854 is 4°Cto 40°C (39°F to 104°F). Care should be taken not to expose the productto high temperature conditions, direct sunlight, ignition sources,oxidizing agents, alkalis or acids. This might cause uncontrollablepolymerization of the product with the generation of heat. Storage andhandling should be in stainless steel, amber glass, amber polyethylene orbaked phenolic lined containers. Procedures that remove or displaceoxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container.