Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Performance Highlights
- No co-solvent content
- Very good chemical resistance
Applications & Uses
- Coating Type
- Suggested Applications
Concrete and other porous substrates, fillers, sealing compounds and synthetic resin mortars.
Properties
- Physical Form
- Appearance
- Milky liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (at 20°C) | approx 1.1 | g/cm³ | — |
| Flash Point | min. 210 | °F | Setaflash |
| Hydroxyl Content | 16 ± 0.7 | % | — |
| pH | approx 6.5 | — | — |
| Viscosity (at 23°C) | 1200 ± 300 | — | — |
| Water Content | 10 ± 1 | %wt | DIN 51 777/1 |
Technical Details & Test Data
- Additional Information
To ensure blister-free curing, SETATHANE® D E 2767 requires the addition of hydrated lime and/or cement as a CO2 scavenger. In certain cases where the film thickness is less than 100 µm, there is no need to add hydrated lime.
Thinning with water or solvents and other polyols is not recommended.
Storage & Handling
- Shelf Life
- 12 Months
- Storage and Handling
SETATHANE® D E 2767 is stable for 12 months when stored in originally sealed containers at temperatures above 32°F or below 90°F. Freezing may damage the product irreversibly. During storage the product may undergo phase separation. For this reason, it should be re-homogenized before use.
Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.