Products

Armite Lubricants MIL-PRF-83483 has excellent lubricity and high load capacity, is particularly suitable for use on aircraft spark plugs and threaded fasteners and fittings at temperatures below 800°F.

Armite Lubricants SAE-AMS-2518 contains graphite which may promote corrosion of aluminum, magnesium,ferrous, zinc, and cadmium alloys or plated coatings. It should not be used with such metals. This compound has been used as an anti-seize compound on aircraft engine spark plugs and threaded fasteners and fittings, but its usage is not limited to these applications. This compound may be used safely in contact with austenitic corrosion-resistant steels, titanium, nickel, and cobalt alloys, and similar corrosionresistant metals and alloys.

Armite Lubricants ZP-770 is an anti-seize compound formulated from zinc powder, specialty oils, and grease for use on aluminum fasteners. ZP-770 is especially effective when fasteners are associated with iron components. ZP-770 helps reduce repair times when applied at every service interval. It is an excellent anti-seize in harsh environments.

Armite Lubricants MIL907 not only has a high corrosion resistance but also prevents oxidation and corrosion in the materials to which it is applied. This quality makes it a standard for all-around use in chemical plants and refineries. This specification covers anti-seize compounds for use on threads of steel nuts, studs, bolts, and other mating surfaces, including superheated steam installations, at temperatures up to 1050°F (566°C).

12/34 Miracle Formula® is the most effective ALL-IN-ONE formulation on the market today. It’s lubricating, moisture displacing, penetrating, and corrosion prevention abilities is unsurpassed by any single product of its kind.

Armite Lubricants AASC-M-2 is a mica based anti-seize compound designed for use on the threads of automotive engine spark plugs and in other applications involving high temperatures. This anti-seize compound, being a non-conductor of electricity and possessing high heat resistance, is particularly suitable for spark plugs. However, because of its insulating properties, it should not be used where mating parts are required to be in good electrical contact.

Armite Lubricants CP-2000 offers protection against seizing, galling, and corrosion for all kinds of steel, except stainless. As a highly conductive metal, this copper based anti-seize is a go-to for electricians.

Armite Lubricants LP-250F is a sealing compound that prevents seizing or galling at temperatures ranging from -350ºF to 2987ºF. This compound consists of 70% pure lead powder and 30% nonvolatile hydrocarbon vehicle and does not dry out, even when exposed to the atmosphere. Due to the fact that lead is one of the least reactive of the metallic elements, the compound is highly non-contaminative and is impervious to the effects of salt, water, steam, oils, ammonia, and hydrocarbons. LP-250F is only prohibited from use with pure oxygen and Freon gasses.

Armite Lubricants A-A-59313 can be used as a lubricant, a sealer, and a tapping compound on plastic as well as metals. The surface need not be cleaned before application unless grit or low quality oil/grease is present. This product reduces assembly friction and increases torque tension by approx. 20%. Use on threaded parts, bushings, gears, valve stems, chain sprockets, levers, hinges, pivots, rollers, heat exchangers, or manifold bolts, or as a gasket release agent. This zinc based anti-seize thread compound is generally used to prevent seizing during assembly and disassembly of threaded or unthreaded aluminum and aluminum alloy components. It also provides protection to metal surfaces.

Armite Lubricants Armite No. 609 is an excellent compound for sealing and protecting gaskets, spline assemblies, shaft, and all metal to metal surfaces. With Armite No. 609 on your equipment, you will be assured of easy disassembly, saving you costly down time and maintenance expenses. Armite No. 609 is a must when assembling engines, transmissions, manifolds, and all internal components.

Armite Lubricants LF-AS 328 to BOEING BMS3-28A is a general purpose anti-seize compound which can be used up to 350°F for threaded parts in contact with aluminum and magnesium alloys.

Armite Lubricants LP-250 is a sealing compound that prevents seizing or galling at temperatures ranging from -350ºF to 2987ºF. This compound consists of 70% pure lead powder and 30% non-volatile hydrocarbon vehicle and does not dry out, even when exposed to the atmosphere. Due to the fact that lead is one of the least reactive of the metallic elements, the compound is highly non-contaminative and is impervious to the effects of salt, water, steam, oils, ammonia, and hydrocarbons. LP-250 is only prohibited from use with pure oxygen and Freon gasses.