Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids and esters combined with wetting agents.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Use
Epoxy Especially recommended for Amine cured systems.
- Application Instructions
General: For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz process aid additives are effective within a range of 1 to 10 parts per 1000 resin or rubber by weight, excluding reinforcements, pigments and fillers. High amount of filler may require a higher percentage of process aid additives than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). In thermosets, too much additive may retard the cure. *Reduce the level of additive or slightly increase the catalyst. Too much additive may retard the cure. Reduce the level of additive or slightly increase the catalyst.
Mixing For two-part thermoset resins, mix the process aid additive in the less viscous or less reactive side before catalyzing.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Solids | 100 | % | — |
| Specific Gravity (25°C) | 0.986 | — | — |
| Effective Ingredients | 100 | % | — |
| pH | 1.0 – 3.0 | — | — |
| Flash Point (C.O.C.) | 300/ 149 | °F/°C | — |
| Viscosity (25ºC) | 200 - 600 | cps | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- Minimum of one year