Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids, esters and amine with neutralizing agents.
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Use Level
- 1 to 10 Parts Per 1000 Resin
- Recommended Uses
- Epoxy
- Especially recommended for Aliphatic amine cured systems
- Application Method
For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz process aid additives are effective within a range of 1 to 10 parts per 1000 resin or rubber by weight, excluding reinforcements, pigments and fillers. High amount of filler may require a higher percentage of process aid additives than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). In thermosets, too much additive may retard the cure. *Reduce the level of additive or slightly increase the catalyst. Too much additive may retard the cure. Reduce the level of additive or slightly increase the catalyst.
Mixing:
For two-part thermoset resins, mix the process aid additive in the less viscous or less reactive side before catalyzing.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Effective Ingredients | 100.0 | % | - |
Flash Point (C.O.C) | min. 325F / min. 163 | °F/°C | - |
pH | 5.25 – 7.25 | - | - |
Solids | 100.0 | % | - |
Specific Gravity (25°C) | 1.005 | - | - |
Viscosity at 25°C | 400 - 1200 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability