Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids, esters, alkanes and alkanols.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Plastics & Elastomers Processing Methods
- Use
- Epoxy, Phenolic
- Vinyl ester
- Pultrusion
- Compression
- Application Instructions
General: For best results, laboratory tests or pre-production trials should determine the optimum addition level. Mold Wiz Process Aid additives are effective within a range of 1 to 10 parts per 1000 resin or rubber by weight, excluding reinforcements, pigments and fillers. High amount of filler may require a higher percentage of Process Aid additives than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). Too much internal may retard the cure. Reduce the level of internal or slightly increase the catalyst.
Mixing: Mix into resin prior to addition of catalyst, fillers, and other resin additives.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity (25°C) | 0.97 | — | — |
| Effective Ingredients | 100 | % | — |
| Solids | 100 | % | — |
| pH (10% in water) | 1.0 – 3.0 | — | — |
| Refractive Index | 1.450 – 1.470 | — | — |
| Flash Point | 415 / 212 | °F/°C | — |
| Viscosity (25°C) | 100 - 220 | cps | — |
Regulatory & Compliance
- Certifications & Compliance
Storage & Handling
- Shelf Life
- Minimum of one year