Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids, esters and amine.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Recommended Uses
- Epoxy Resin
- Epoxy BMC
- Phenolic Vinyl Ester
- Application Method
General:
For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz process aid additives are effective within a range of 1 to 10 parts per 1000 resin or rubber by weight, excluding reinforcements, pigments and fillers. High amount of filler may require a higher percentage of process aid additives than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). In thermosets, too much additive may retard the cure. Reduce the level of additive, or slightly increase the catalyst.
Mixing:
For two-part thermoset resins, mix the process aid additive in the less viscous or less reactive side before catalyzing.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Effective Ingredients | 100.0 | % | - |
| Flash Point (C.O.C) | 300 / 149 | °F/°C | - |
| pH (10% in water) | 1.0 – 3.0 | - | - |
| Solids | 100.0 | % | - |
| Specific Gravity (25°C) | 0.99 | - | - |
| Viscosity at 25°C | 300 - 700 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance