Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty esters and amides, combined with wetting agents.
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Use Level
- 1 to 20 Parts Per 1000 Resin
- Recommended Uses
Various functionality Epoxy systems (Bisphenol A, F etc.) with various curing agents: acid/anhydride, imidazole, amine.
- Application Method
General:
For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz process aid additives are effective within a range of 1 to 20 parts per 1000 resin by weight, excluding reinforcements, pigments and fillers. High amounts of filler and/or different processing conditions may require a higher percentage of process aid additives than the indicated maximum. Start an evaluation at 15 parts per 1000 (1.5%) and reduce the loading level if resin viscosity decreases too far for the process and causes excessive slippage. For additional information, refer to Process Aid Additives / Thermoset Resins – Testing Procedures.
Mixing:
For two-part thermoset resins, mix the process aid additive in the less viscous or less reactive side before catalyzing.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Effective Ingredients | 100.0 | % | - |
| Flash Point (C.O.C) | min. 300 / min. 149 | °F/°C | - |
| pH | 4.3 | - | - |
| Solids | 100.0 | % | - |
| Specific Gravity (25°C) | 0.95 | - | - |
| Viscosity at 25°C | max. 500 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability