Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids and esters
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Use Level
- 0.75 to 2.0 Parts Per 100 Resin
- Recommended Uses
Phenolic Powder Resins (“Hexa” cured)
- Application Method
General:
For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz process aid additives are effective within a range of 0.75 to 2.0 parts per 100 resin by weight, excluding reinforcements, pigments and fillers. Always start an evaluation at 1 part per 100. High amount of filler may require a higher percentage of process aid additive. Too much additive may retard the cure. Reduce the level of process aid additive or slightly increase the catalyst
Mixing:
Mix into resin prior to addition of catalyst, fillers, and other resin additives
Properties
- Compatible with
- Phenolic Resin
- Typical Properties
Value | Units | Test Method / Conditions | |
Bulk Density | 5.27 | lb/gal | - |
Dropping Point | 154 / 68 | °F / °C | - |
Effective Ingredients | 100.0 | % | - |
Solids | 100.0 | % | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability