Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary complex mixture comprising fluorinated and non-fluorinated groups.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Use Level
- 1 to 10 Parts Per 1000 Resin
- Recommended Uses
Processing all polyolefins. Also for other resins such as acrylics and rubbers where improved lubricity of the molded part, or reduced coefficient of friction is required.
- Application Method
General:
For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz Process Aid Additives are effective within a range of 1 to 10 parts per 1000 resin excluding reinforcements, pigments and fillers. A high amount of filler may require a higher percentage of process aid additive than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). The process aid additive may increase the MFI. Reduce the level of additive or reduce the process temperature to raise the resin viscosity and to eliminate screw slippage.
Mixing:
Dry blend the process aid additive by tumbling or use an additive dispenser to meter directly into the resin stream. Process aid additive may be compounded into the resin to make a masterbatch.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Effective Ingredients | 100.0 | % | - |
| Solids | 100.0 | % | - |
| Specific Gravity (25°C) | 0.78 | - | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability