Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids, esters and glycerides.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers Processing Methods
- Use Level
- 1 to 10 Parts Per 1000 Resin
- Recommended Uses
Broad applicability for processing many thermoplastic resins including PE, PP, ABS and clear styrenics (K-Resin™) . Also suitable for processing TPR & SBR/NR Each component in this formulation has been Certified by our raw material suppliers as having direct USFDA approval for food contact.
- Application Method
General:
For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz process aid additives are effective within a range of 1 to 10 parts per 1000 resin excluding reinforcements, pigments and fillers. A high amount of filler may require a higher percentage of additives than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). The additive may increase the MFI. Reduce the level of additive or the process temperature to raise the resin viscosity and to eliminate screw slippage.
Mixing:
Dry blend the process aid additive by tumbling or use dispenser to meter directly into the resin stream. Process aid additives may be compounded into the resin to make a masterbatch.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Bulk Density | 6.0 | lb/gal | - |
Dropping Point | 239 – 266 / 115 – 130 | °F / °C | - |
Effective Ingredients | 100.0 | % | - |
Flash Point (C.O.C) | min. 440 / min. 225 | °F/°C | - |
Solids | 100.0 | % | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability