Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids, esters and glycerides.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Recommended Uses
A flow enhancer/dispersant for TiO2 and other Inorganic fillers and pigments. Improves wetting and loading and reduces torque in mixing. Also for processing thermoplastic resins , especially those molded at high temperatures (above 500ºF/260ºC) Each component in this formulation has been certified by our raw material suppliers as having direct USFDA approval for food contact.
- Application Method
General:
For best results, laboratory tests or pre-production trials should determine the optimum addition level. MoldWiz process aid additives are effective within a range of 1 to 10 parts per 1000 resin excluding reinforcements, pigments and fillers. A high amount of filler may require a higher percentage of additives than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). The additive may increase the MFI. Reduce the level of additive or the process temperature to raise the resin viscosity and to eliminate screw slippage.
Mixing:
Dry blend the additive by tumbling or use dispenser to meter directly into the resin stream. Additives may be compounded into the resin to make a masterbatch.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Bulk Density | 5.3 | lb/gal | - |
Dropping Point | 140 – 158 / 60 – 70 | °F / °C | - |
Effective Ingredients | 100.0 | % | - |
Flash Point (C.O.C) | Non-Flammable | °F/°C | - |
Solids | 100.0 | % | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability