Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic triglyceride of fatty acids combined with wetting agents.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Use Level
- 1 to 10 Parts Per 1000 Resin
- Recommended Uses
As a surface treatment, flow enhancer / dispersant for fillers and color. Improves wetting and loading and reduces torque in mixing. Can be used in combination with, or a replacement for, silane treatments. Also for processing thermoplastic resins , especially those molded at high temperatures (above 500ºF/260ºC) Each component in this formulation has been certified by our raw material suppliers as having direct USFDA approval for food contact.
- Application Method
General:
For best results, laboratory tests or pre-production trials should determine the optimum addition level. MOLD WIZ Process Aid Additives are effective within a range of 1 to 10 parts per 1000 resin or rubber by weight, excluding reinforcements, pigments and fillers. High amounts of filler may require a higher percentage of process aid additive than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). In thermosets, too much process aid additive may retard the cure. Reduce the level of additive or slightly increase the catalyst. In thermoplastics, the process aid additive may increase the MFI. Reduce the level of additive, or reduce the process temperature to raise the resin viscosity and to eliminate screw slippage.
Mixing:
For two-part thermoset resins, mix the process aid additive in the less viscous or less reactive side before catalyzing. For thermoplastics, dry blend the process aid additive by tumbling, or use an additive dispenser to meter directly into the resin stream. Process aid additives may be compounded into the resin to make a masterbatch.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Effective Ingredients | 100.0 | % | - |
| Flash Point | Non-Flammable | °F/°C | - |
| Solids | 100.0 | % | - |
| Specific Gravity (25°C) | 0.916 | - | - |
| Viscosity at 25°C | max. 100 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability