Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of modified polymers, organic fatty amides and waxes.
Features & Benefits
Applications & Uses
- Markets
- Compatible Polymers & Resins
- Use Level
- 10 Parts Per 1000 Resin
- Recommended Uses
Especially recommended for improving Scratch & Mar in PP, TPO and Polyolefins in general. Specifically recommended for automotive interior/exterior applications.
- Application Method
General:
For best results, laboratory tests or pre-production trials should determine the optimum addition level. Mold Wiz process aid additives are effective within a range of 10 parts per 1000 resin excluding reinforcements, pigments and fillers. A high amount of filler may require a higher percentage of process aid additive than the indicated maximum. Start an evaluation from 10 to 30 parts per 1000 (1.0%). Reduce the level of additive or reduce the process temperature to raise the resin viscosity and to eliminate screw slippage.
Mixing:
Dry blend the process aid additive by tumbling or use an additive dispenser to meter directly into the resin stream. Process aid additives may be compounded into the resin to make a master-batch.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Dropping Point | 212-257 / 100-125 | °F / °C | - |
| Effective Ingredients | 100.0 | % | - |
| Solids | 100.0 | % | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability