Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Composition
Proprietary synergistic blend of organic fatty acids and esters combined with wetting agents.
Features & Benefits
- Materials Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Use Level
- 1 to 10 Parts Per 1000 Resin
- Recommended Uses
- Nylon
- Polyamide-Imide
- Nucleated Polypropylene
- Application Method
General:
For best results, laboratory tests or pre-production trials should determine the optimum addition level. MOLD WIZ process aid additives are effective within a range of 1 to 10 parts per 1000 resin excluding reinforcements, pigments and fillers. A high amount of filler may require a higher percentage of process aid additive than the indicated maximum. Always start an evaluation at 5 parts per 1000 (0.5%). The process aid additive may increase the MFI. Reduce the level of additive or reduce the process temperature to raise the resin viscosity and to eliminate screw slippage.
Mixing:
Dry blend the process aid additive by tumbling or use an additive dispenser to meter directly into the resin stream. Process aid additives may be compounded into the resin to make a master batch.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Effective Ingredients | 100.0 | % | - |
Flash Point (C.O.C) | min. 400 / min. 204 | °F/°C | - |
Specific Gravity (25°C) | 0.958 | - | - |
Viscosity at 25°C | max. 150 | cPs | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability