Products

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Polyester elastomer, Shore D35

PBT unreinforced, flame retardant

TPE-S, Shore A80

KEBABLEND / H 27.1200 PBT is a functional compound based on PBT with high density.

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

POM-CF20, POM copolymer, medium viscosity, carbon fiber reinforced, electrically conductive

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

TPE-S, Shore A40, black

TPE-S, Shore A60, natural

TPE-S, Shore A80

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebablend® / WR XB 111001/12 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

BARLOG plastics GmbH Kebablend® / WR 01/1220 is a special compound based on POM, which combines high strength with good sliding behavior and high wear resistance, as well as electrical conductivity.

POM copolymer unreinforced, low viscosity, laser-inscribable

TPE-S, Shore A46, black

KEBABLEND / WR 01/2120 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebablend® / WR 01/1120/2110 is a special compound based on POM, which combines high strength and rigidity with good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebablend® / WR 01/2202 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break.

PBT unreinforced, injection molding type, approved for use in contact with food

BARLOG plastics GmbH Kebablend® / WR XB 111001/1 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

(PBT + ABS) -GF30, PBT / ABS blend, 30% glass fiber reinforced, reduced tendency to warp

BARLOG plastics GmbH Kebablend® / WR XB 081101 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebaflex® / U FE 181105/2 Natural is a TPU with a Shore hardness of A 70. It is characterized by high flexibility, very good wear and abrasion resistance as well as good damping and resilience behavior.

POM copolymer unreinforced, low viscosity

POM copolymer unreinforced, medium viscosity

BARLOG plastics GmbH Kebablend® / WR FE 190202 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

POM copolymer unreinforced, medium viscosity, electrically conductive

BARLOG plastics GmbH Kebablend® / WR 02/2110 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

PBT-GF30, PBT, 30% glass fiber reinforced

POM copolymer unreinforced, medium viscosity, UV stabilized

BARLOG plastics GmbH Kebaflex® / E 35.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

KEBABLEND / WR 01/2105 is a special compound based on POM, which has very good sliding behavior and high wear resistance.