Kebaform® / C 901 TS

1 of 53 products in this brand

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

Polymer Name: Polyacetal Homopolymer (POM)

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Polymer Name: Polyacetal Homopolymer (POM)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
Polyacetals

Features & Benefits

Materials Features: Chemical Resistant,
Dimensional Stability,
Good Reset Behavior,
Good Sliding Properties,
Semi Crystalline,
Wear Resistant

Applications & Uses

Markets: Agriculture & Feed,
Automotive & Transportation,
Building & Construction,
Consumer Goods,
Electrical & Electronics,
Industrial
Applications: Agriculture & Feed — Agricultural Films
Other Agricultural Films
Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
Exterior & Body,
Interior,
Other Automotive Applications,
Powertrain & UTH,
Seating
Automotive & Transportation — Bonding & Assembly
Other Bonding & Assembly Applications
Building & Construction — Building Materials
Pipes & Plumbing,
Structural Components
Industrial — Chemical & Industrial Manufacturing
Other Industrial Applications
Electrical & Electronics — Devices & Assemblies
Automotive Electronics,
Consumer Electronics,
Other Devices & Assemblies
Consumer Goods — Furniture
Electrical & Electronics — Parts & Components
Other Parts & Components
Plastics & Elastomers End Uses: Agricultural Applications,
Automotive Applications,
Bearing Bushes,
Bearings,
Fasteners,
Furniture,
Gears

Properties

Flame Rating: IEC 60695-11-10 HB
Flame Rating: IEC 60695-11-10 HB
Mechanical Properties
Physical Properties
Thermal Properties
Electrical Properties

	Value	Units	Test Method / Conditions
Elongation Modulus	2150	MPa	ISO 527-1
Yield Stress	42	MPa	ISO 527-1
Elongation at Stretch	11	%	ISO 527-1
Charpy Impact Strength (23°C)	70	kJ/m2	ISO 179/1eU
Charpy Notched Impact Strength (23°C)	3.5	kJ/m2	ISO 179/1eA

	Value	Units	Test Method / Conditions
Melt Index - MFR (190°C/2.16 kg)	5.8	g/10min	ISO 1133
Shrinkage - Flow	2.3	%	ISO 294-4
Shrinkage - Across Flow	2.3	%	ISO 294-4
Density	1390	kg/m3	ASTM D 792

	Value	Units	Test Method / Conditions
Melting Point - DSC (10°C/min)	168	°C	ISO 11357-1/-3
Heat Deflection Temperature - HDT (1.80 MPa)	100	°C	ISO 75-1/-2
Fire Behavior (0.8 mm Wall Thickness)	HB	-	IEC 60695-11-10
Fire Behavior (1.6 mm Wall Thickness)	HB	-	IEC 60695-11-10

	Value	Units	Test Method / Conditions
Volume Resistance	10000000000000.0	ohm.m	IEC 60093
Specific Surface Resistance	2.00E+11	ohm	IEC 60093

Regulatory & Compliance

Certifications & Compliance: Halal,
Kosher

Kebaform® / C 901 TS

Similar Products

LNP™ LUBRICOMP™ Compound KCL34A

LNP™ LUBRICOMP™ Compound KL004A

LNP™ LUBRICOMP™ Compound KP003AXZ

LNP™ LUBRICOMP™ Compound KP004A

LNP™ LUBRICOMP™ Compound KP004AH

LNP™ LUBRICOMP™ Compound KP004AXP

Knowde Enhanced TDS