Products

TPE-S, Shore A80

TPE-S, Shore A80

TPE-S, Shore A40, black

TPE-S, Shore A60, natural

TPE-S, Shore A60, black, improved compression set at high temperatures

TPE-S, Shore A69, black, modified for good adhesion to ABS, PC and ABS / PC blends.

TPE-S, Shore A46, black

KEBABLEND / EC FE 190501 TPE is a TPE-S with a Shore hardness of D 45. It has good electrical conductivity properties.

BARLOG plastics GmbH Kebaflex® / SG 85.E A.02 is a TPE-S, Shore A86, extrusion. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebablend® / M FE 190401 TPE (black) is a development product based on TPE for the production of injection molded magnets. The material has a Shore A 82 hardness.

BARLOG plastics GmbH Kebaflex® / S 95F A.01 Translucent is a TPE-S, Shore A95, translucent, suitable for food contact. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A63, translucent, food compliant according to EU 10/2011 and FDA

BARLOG plastics GmbH Kebaflex® / S 90 A.05 is a TPE-S, Shore A90. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A75, modified for good adhesion to polycarbonate

TPE-S, Shore A50, translucent

TPE-S, Shore A55, modified for good adhesion to adhesion-modified polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A63, modified for adhesion to PET, food compliant according to EU 10/2011 and FDA

TPE-S, Shore A31, translucent, food compliant according to EU 10/2011 and FDA

TPE-S, Shore A79, natural, modified for good adhesion, etc. On PBT and PBT blends. KEBAFLEX - H / SPBT 70 A.02 natural was developed specially for use outdoors (UV stabilization) and has an optimized demolding behavior.

BARLOG plastics GmbH Kebaflex® / FE 170403 is a TPE-S, Shore A85, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12, etc. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A25, black

TPE-S, Shore A55, natural, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

TPE-S, Shore A70, also suitable for extrusion, food compliant according to 10/2011 EG

BARLOG plastics GmbH Kebaflex® / SG 85 FR A.01 black is a product for the production of flexible, flame-retardant components. It has a Shore hardness of 88 A and achieves V0 classification from a wall thickness of 3.0 mm based on the UL 94 test standard.

TPE-S, Shore A45, natural

TPE-S, Shore A35, translucent, suitable for food contact

TPE-S, Shore A30, natural

TPE-S, Shore A79, electrically conductive

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

BARLOG plastics GmbH Kebaflex® / S D50 A.02 Black is a TPE-S, Shore D50, black. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A60, modified for good adhesion, etc. On PBT and PBT blends.

TPE-S, Shore A45, modified for good adhesion, etc. On PBT, PC and PC / ABS blends.

TPE-S, Shore A65, translucent. Abrasion resistant, high dynamic resilience, good DVR and good adhesion to PP in 2K injection molding.

TPE-S, Shore A41, natural, modified for good adhesion to ABS, PC and ABS / PC, food compliant according to EU 10/2011 and FDA

BARLOG plastics GmbH Kebaflex® SG 95 A.01 black is a TPE-S, Shore A95, black. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebaflex® / SG 90 A.02 is a TPE-S, Shore A90, natural. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.