Products

Polyester elastomer, Shore D35

TPE-S, Shore A80

TPE-S, Shore A40, black

TPE-S, Shore A60, natural

TPE-S, Shore A80

TPE-S, Shore A60, black, improved compression set at high temperatures

Polyester elastomer, Shore D25, suitable for food contact

TPE-S, Shore A46, black

KEBABLEND / EC FE 190501 TPE is a TPE-S with a Shore hardness of D 45. It has good electrical conductivity properties.

KEBABLEND / H 38.1900 EEA is a functional compound based on EEA with high density.

BARLOG plastics GmbH Kebaflex® / U FE 181105/2 Natural is a TPU with a Shore hardness of A 70. It is characterized by high flexibility, very good wear and abrasion resistance as well as good damping and resilience behavior.

BARLOG plastics GmbH Kebaflex® / E 35.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

BARLOG plastics GmbH Kebaflex® / U D72 ST B.01 is a TPU with a Shore hardness of 72D. It is characterized by flexibility and good wear and abrasion resistance.

BARLOG plastics GmbH Kebablend® / EC FE 190501 TPE is a TPU with a Shore hardness of A 87. It is characterized by good hydrolysis resistance, very good wear and abrasion resistance as well as good damping and resilience behavior. It also has good electrically conductive properties.

BARLOG plastics GmbH Kebaflex® / SG 85.E A.02 is a TPE-S, Shore A86, extrusion. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A69, black, modified for good adhesion to ABS, PC and ABS / PC blends.

BARLOG plastics GmbH Kebaflex® / S FE 180401 natur is a development product for the production of flexible, flame-retardant components. Kebaflex® / S FE 180401 natural has a Shore hardness of 80 A and, from a wall thickness of 1.6 mm, achieves the V0 classification based on the UL 94 test standard. For the production of seals in electrical and electronic applications.

TPE-S, Shore A50, translucent, suitable for food contact

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

BARLOG plastics GmbH Kebaflex® / E 60.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

TPE-S, Shore A30, natural

TPE-S, Shore A70, translucent

BARLOG plastics GmbH Kebaflex® SG 85 A.1 is a TPE-S, Shore A85, natural. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

Polyester elastomer, Shore D55

TPE-S, Shore A35, translucent, suitable for food contact

BARLOG plastics GmbH Kebaflex® / S 95F A.01 Translucent is a TPE-S, Shore A95, translucent, suitable for food contact. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A25, black

Polyester elastomer, Shore D39

BARLOG plastics GmbH Kebaflex® / E 40.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

TPE-S, Shore A79, electrically conductive

TPE-S, Shore A63, translucent, food compliant according to EU 10/2011 and FDA

TPE-S, Shore A65, translucent. Abrasion resistant, high dynamic resilience, good DVR and good adhesion to PP in 2K injection molding.

BARLOG plastics GmbH Kebaflex® / SG 85 HT A.01 is a TPE-S, Shore A85, with improved compression set at high temperatures. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebaflex® / U A 75 ST B01 natural is a polyester TPU with high resistance to oils and fats, very good damping and resilience behavior, high temperature resistance and very good compression set. KEBAFLEX / U A75 ST B.01 natural does not contain any plasticizers. The trade name KEBAFLEX / U stands for a range of thermoplastic polyurethane elastomers. KEBAFLEX / U is characterized by excellent sliding and wear behavior, suitability for use at elevated temperatures, good UV resistance and high mechanical resilience.

TPE-S, Shore A79, natural, modified for good adhesion, etc. On PBT and PBT blends. KEBAFLEX - H / SPBT 70 A.02 natural was developed specially for use outdoors (UV stabilization) and has an optimized demolding behavior.

BARLOG plastics GmbH Kebaflex® / U D63 ST B.01 is a TPU with a Shore hardness of 63D. It is characterized by flexibility and good wear and abrasion resistance.