Products

TPE-S, Shore A80

TPE-S, Shore A40, black

TPE-S, Shore A60, natural

TPE-S, Shore A80

TPE-S, Shore A60, black, improved compression set at high temperatures

TPE-S, Shore A46, black

BARLOG plastics GmbH Kebaflex® / E 35.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

BARLOG plastics GmbH Kebaflex® / U D72 ST B.01 is a TPU with a Shore hardness of 72D. It is characterized by flexibility and good wear and abrasion resistance.

TPE-S, Shore A69, black, modified for good adhesion to ABS, PC and ABS / PC blends.

BARLOG plastics GmbH Kebaflex® / S FE 180401 natur is a development product for the production of flexible, flame-retardant components. Kebaflex® / S FE 180401 natural has a Shore hardness of 80 A and, from a wall thickness of 1.6 mm, achieves the V0 classification based on the UL 94 test standard. For the production of seals in electrical and electronic applications.

TPE-S, Shore A50, translucent, suitable for food contact

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

BARLOG plastics GmbH Kebaflex® / E 60.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

TPE-S, Shore A30, natural

TPE-S, Shore A70, translucent

BARLOG plastics GmbH Kebaflex® SG 85 A.1 is a TPE-S, Shore A85, natural. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A35, translucent, suitable for food contact

BARLOG plastics GmbH Kebaflex® / S 95F A.01 Translucent is a TPE-S, Shore A95, translucent, suitable for food contact. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A25, black

BARLOG plastics GmbH Kebaflex® / E 40.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

TPE-S, Shore A79, electrically conductive

TPE-S, Shore A63, translucent, food compliant according to EU 10/2011 and FDA

TPE-S, Shore A65, translucent. Abrasion resistant, high dynamic resilience, good DVR and good adhesion to PP in 2K injection molding.

BARLOG plastics GmbH Kebaflex® / SG 85 HT A.01 is a TPE-S, Shore A85, with improved compression set at high temperatures. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A79, natural, modified for good adhesion, etc. On PBT and PBT blends. KEBAFLEX - H / SPBT 70 A.02 natural was developed specially for use outdoors (UV stabilization) and has an optimized demolding behavior.

BARLOG plastics GmbH Kebaflex® / E 75.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

TPE-S, Shore A60, modified for good adhesion, etc. On PBT and PBT blends.

BARLOG plastics GmbH Kebaflex® / E 50.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

BARLOG plastics GmbH Kebaflex® / E 45.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

TPE-S, Shore A80, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

TPE-S, Shore A50, natural

BARLOG plastics GmbH Kebaflex® / E 80.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

TPE-S, Shore A25, black

BARLOG plastics GmbH Kebaflex® / S 90 A.05 is a TPE-S, Shore A90. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebaflex® / FE 170403 is a TPE-S, Shore A85, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12, etc. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A25, natural