Products

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Polyester elastomer, Shore D35

TPE-S, Shore A60, black, improved compression set at high temperatures

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebablend® / WR XB 111001/12 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

BARLOG plastics GmbH Kebablend® / WR 01/1220 is a special compound based on POM, which combines high strength with good sliding behavior and high wear resistance, as well as electrical conductivity.

TPE-S, Shore A46, black

KEBABLEND / WR 01/2120 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebablend® / WR 01/1120/2110 is a special compound based on POM, which combines high strength and rigidity with good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebablend® / WR 01/2202 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break.

BARLOG plastics GmbH Kebablend® / WR XB 111001/1 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

BARLOG plastics GmbH Kebablend® / WR XB 081101 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebaflex® / U FE 181105/2 Natural is a TPU with a Shore hardness of A 70. It is characterized by high flexibility, very good wear and abrasion resistance as well as good damping and resilience behavior.

POM copolymer unreinforced, medium viscosity

BARLOG plastics GmbH Kebablend® / WR FE 190202 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebablend® / WR 02/2110 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

KEBABLEND / WR 01/2105 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebaflex® / U D72 ST B.01 is a TPU with a Shore hardness of 72D. It is characterized by flexibility and good wear and abrasion resistance.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

KEBABLEND / WR 01/2110 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

POM copolymer unreinforced, highly viscous for injection molding and extrusion processing

BARLOG plastics GmbH Kebablend® / WR XB 111001/3 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

BARLOG plastics GmbH Kebaform® / C FE 161105 is a tribologically optimized POM copolymer which, due to its property profile, is particularly suitable for applications that require good sliding and wear behavior.

BARLOG plastics GmbH Kebablend® / WR 02/2102 is a special compound based on POM homopolymer, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break and, compared to POM copolymer, an increased melting temperature and heat resistance.

BARLOG plastics GmbH Kebaflex® / S FE 180401 natur is a development product for the production of flexible, flame-retardant components. Kebaflex® / S FE 180401 natural has a Shore hardness of 80 A and, from a wall thickness of 1.6 mm, achieves the V0 classification based on the UL 94 test standard. For the production of seals in electrical and electronic applications.

BARLOG plastics GmbH Kebablend® / WR 01/2420 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break.

Polyester elastomer, Shore D55

Polyester elastomer, Shore D39

TPE-S, Shore A65, translucent. Abrasion resistant, high dynamic resilience, good DVR and good adhesion to PP in 2K injection molding.

BARLOG plastics GmbH Kebaflex® / SG 85 HT A.01 is a TPE-S, Shore A85, with improved compression set at high temperatures. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

BARLOG plastics GmbH Kebaflex® / U A 75 ST B01 natural is a polyester TPU with high resistance to oils and fats, very good damping and resilience behavior, high temperature resistance and very good compression set. KEBAFLEX / U A75 ST B.01 natural does not contain any plasticizers. The trade name KEBAFLEX / U stands for a range of thermoplastic polyurethane elastomers. KEBAFLEX / U is characterized by excellent sliding and wear behavior, suitability for use at elevated temperatures, good UV resistance and high mechanical resilience.

BARLOG plastics GmbH Kebaflex® / U D63 ST B.01 is a TPU with a Shore hardness of 63D. It is characterized by flexibility and good wear and abrasion resistance.

BARLOG plastics GmbH Kebaflex® / U A90 ST B01 is a TPU with a Shore hardness of A 90. It is characterized by high flexibility and very good wear and abrasion resistance.

BARLOG plastics GmbH Kebaflex® / U A 85 EF B01 natural is a TPE-U, Shore A85, easy flowing. The trade name KEBAFLEX / U stands for a range of thermoplastic polyurethane elastomers. KEBAFLEX / U is characterized by excellent sliding and wear behavior, suitability for use at elevated temperatures, good UV resistance and high mechanical resilience.

BARLOG plastics GmbH Kebablend® / WR 07/1130/2115 is a tribologically modified special compound based on PPS that combines high strength with good sliding behavior and high wear resistance, even at elevated temperatures.