Products

Rheovis® FRC is a liquid product with a concentration of approximately 55% (solids). It is an efficient cationic thickening agent for fabric softeners and can be used within a pH range of 3.0 to 7.0. It functions as a thickener and is used as a performance booster. Its application is in laundry and commercial laundry.

Sokalan® CP 10 is a dispersing ingredient that functions as a performance booster and is available as a fully neutralized version (pH approximately 8.5) in approximately 45% liquid form. This product finds applications in hard surface cleaning, food and beverage processing, food service and kitchen hygiene, commercial laundry, institutional cleaning and sanitation, and vehicle and transportation care.

Sokalan® PA 15 is a performance booster and dispersing ingredient that can be used in dishwashing applications. It prevents the redisposition of suspended soils back onto surfaces with good dispersancy. The product helps to enhance cleaning efficiency and reduce spotting and streaking.

Pluronic® 31R1 is a 100% active product with a cloud point of 25°C. It is suitable for machine floor cleaning as an excellent foam controlling agent and provides very good defoaming properties. The final surfactant choice depends on the formulation. It is listed on EPA’s Safer Chemical Ingredients List and is suitable for institutional cleaning and sanitation as well as food and beverage processing and kitchen hygiene.

Sokalan® HP 66 K is a modified copolymer of vinylpyrrolidone and vinylimidazole and is available in liquid form with a concentration of approximately 41%. It offers significantly better performance compared to PVP, with higher activity and better solubility in detergents than Sokalan® HP 56 K.

Lutensol® AT 25 Powder is a C16C18 fatty alcohol ethoxylate that functions as a viscosity enhancer, allowing dispersions to exhibit high mechanical and electrolyte stability as well as a small particle size. It serves as an emulsifying agent and can be used as an additive, dispersant, or co-surfactant.

Glucopon® 215 UP is a short-chain APG sold as a liquid of 63.5% concentration. This mid-chain APG surfactant has moderate hydrotropic ability and high foam, providing good primary cleaning. It is 100% derived from renewable resources and is used as a mild degreaser and foaming/stabilizing surfactant that won't damage even floor finishes. It has excellent gloss retention and plastic compatibility, and contains no biocide for preservation. It is listed on the EPA’s Safer Chemical Ingredients List and is approved for direct release to the environment.

Plurafac® LF 403 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Pluronic® L62 LF is a 100% active product that is suitable for use in both high- and low-temperature commercial dishwashing machines. The choice of the final surfactant depends on the formulation. It is listed on the EPA's Safer Chemical Ingredients List.

Sokalan® PA 30 CL PN Granules are partially neutralized and available as granules with a concentration of approximately 49.5%. The product exhibits excellent performance properties, including scale inhibition and good dispersancy, and helps prevent the re-deposition of suspended soils back onto surfaces.

Rheovis® AT 120 offers detergent formulators multiple benefits, such as its high thickening efficiency, improved rheology profile (shear thinning), and its ability to be post-added in a typical manufacturing process. It can effectively produce transparent liquid detergents, improve the pumping response of liquid detergents, and is highly compatible with other detergent components.

Pluronic® L 81 is a low-foaming surfactant that is 100% active and suitable for use in low-temperature commercial dishwashing machines. It provides good defoaming and wetting properties, making it suitable for use in food service and kitchen hygiene applications. The product is listed on Safer Choice. Pluronic® L 81 is commonly used in automatic dishwashing and bottle wash applications.

Rheovis® TTA is a liquid product with a 30% concentration of solids. It is an anionic, high shear thinning, associative rheology modifier with an optimal pH range of 6-11. This shear thinning thickener can be used to formulate no-drip hard surface cleaners, such as a glass cleaner.

Lutensol® AT 25 Flakes is a fatty alcohol ethoxylate based on C16C18 and serves as a viscosity enhancer. It is particularly useful in dispersing systems as it promotes high mechanical and electrolyte stability as well as a small particle size. It functions as an emulsifying agent and can be used as a co-surfactant and dispersant.

Lutropur® MSA is a high-purity, readily biodegradable, and less corrosive strong acid with a low vapor pressure and a high dissolving capacity on many scales. Lutropur® MSA has synergy with certain acids and also with Trilon® M (a chelating agent) on many scales. It is an excellent product for removing dye or pigment-type soils. Additionally, it is listed on the EPA’s Safer Chemical Ingredients List.

Pluronic® 25R2 is a 100% active product suitable for use in low-temperature commercial dishwashing machines. It provides good defoaming and wetting properties and is heavily used in the industry as a rinse aid for low-temperature commercial dish machines. It is also suitable for machine floor cleaning as a foam controlling agent.

Pluronic® L 61 is a 100% active product and suitable for low-temperature commercial dishwashing machines. It is a low-foaming surfactant that provides good defoaming and wetting. In addition to its use in dishwashing machines, it is also suitable for machine floor cleaning as a foam controlling agent.

Sokalan® CP 7 is a copolymer of methacrylic acid and acrylic acid. Polymeric dispersing agents have the potential to inhibit incrustation and scale formation due to their ability to disperse suspended solids. Furthermore, Sokalan® CP 7 boosts detergent properties, thereby overcoming deficiencies seen when phosphates are removed from formulations.

Texapon® K-30 UP is an anionic surfactant that appears as a slightly yellow liquid to slightly pasty substance with a concentration of approximately 29%. It has the ability to generate a very high initial foam and does not contain any preservatives. It is commonly used in the formulation of shampoos, shower and bath preparations, and skin cleansers.

Sokalan® HP 165 is an unbranched homopolymer of polyvinylpyrrolidone (PVP) that functions as a dye transfer inhibitor for fabric color care. It is a performance booster used in color care ingredients and is suitable for use in laundry and commercial laundry applications.

Lutensol® XL 89 is an efficient and easy-to-handle wetting agent with a C10 guerbet alcohol alkoxylate POE (8) composition and 80% active content. It is synthetically derived and readily degradable. This product can provide improved performance compared to NP-9 in various in-can and tank mix applications. Lutensol® XL 89 is suitable for a wide range of formulation types, including emulsifier concentrates, oil-in-water and water-in-oil emulsions, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, wettable granules, and wettable powders.

Lutensol® CS 6250 is a clear, colorless liquid with 100% activity that is a good solubilizer, penetrating agent, and low-foaming agent. It acts as a co-solvent or co-surfactant with a cloud point greater than 100 °C. It is a petroleum-based, non-ionic surfactant, and Lutensol® AO 7 is the main component in this category.

Lutensol® XL 40 is available as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low when compared to regular alcohol ethoxylates with the same degree of ethoxylation. It has a HLB value of 10.5 and is listed on the Safer Choice label. The final surfactant choice will be dependent on the formulation.

Elestab® CPN Ultrapure is a cosmetic and cleaning ingredient that functions as a preservative and antimicrobial agent, ensuring product stability and safety. It is an ultra-pure form of Chlorphenesin and is listed in the DSL (Canada) chemical inventory. It is suitable for use in various markets, including HI&I Care, and is classified as an antioxidant and preservative in the cosmetic ingredients category and as a microbial control and preservative in the cleaning ingredients category.

Sokalan® CP 5 is a polymeric dispersing agent that has the potential to inhibit incrustation and scale formation. This is due to its ability to disperse suspended solids, which boosts detergent efficacy and overcomes deficiencies seen when phosphates are removed from formulations.

Plurafac® LF 900 is a surfactant composed of 5% surfactant in a 25% solution of BDG, which provides excellent foam control and good wetting. It is listed on the EPA’s Safer Chemical Ingredients List, and its benefits include defoaming and foam control, as well as wetting and low foam properties.

Lutensol® A 65 N is a liquid product with a concentration of 100%, or Lutensol® TO 89 in a 90% solution. The hydrophobe is based on saturated iso-C13 alcohol with moderate branching and has a cloud point of 60°C. It offers excellent detergency and wetting power and is a moderate foamer. Additionally, it is highly compatible with other nonionic, cationic, and anionic surfactants.

Trilon® P Liquid is a liquid product with a concentration of approximately 40%. It has a high binding capacity for iron or manganese, especially at high pH, and is an important additive for controlling rust stains in water with iron present.

Pluronic® 17R4 is a 100% active product that is ideal for use as a foam controlling agent in machine floor cleaning applications. The final choice of surfactant will depend on the specific formulation. This EO/PO-block polymer has approximately 40% EO and a cloud point of 46°C.

Lutensol® XL 50 is a 100% active product with a comparatively lower level of residual alcohol than regular alcohol ethoxylates with the same degree of ethoxylation. It is suitable for use as a foam control and degreasing agent in machine floor cleaning.

Tinogard® DA is a non-phenolic antioxidant available as white or yellowish flakes to protect oils, fats, and fragrances from oxidative decomposition. It also protects colors, fragrances, and natural compounds from photolytic or photooxidative degradation. It is soluble in oil and alcohol.

Luvipur® FM 85 is a liquid product with a concentration of 85%. It can be utilized as a neutralizer or acidifier and has a high dissolving power on different metal scales. It is fully stable in non-oxidizing formulations and readily biodegradable. It finds applications in cleaning in place and manual dishwashing.

Sokalan® HP 56 K is a copolymer of vinylpyrrolidone and vinylimidazole that is available in both liquid (approximately 30% concentration) and granular (minimum 95% concentration). It offers significantly better performance compared to PVP, thanks to the additional functionality provided by vinylimidazole.

Glucopon® 420 UP is 100% derived from renewable resources. It is mild to the skin and can synergistically reduce the skin irritation caused by anionic surfactants. It has excellent gloss retention, little to no streaking, and excellent plastic compatibility. This product contains no biocide for preservation and is listed on the EPA’s Safer Chemical Ingredients List.

Tinogard® TL is a broad-spectrum UV light stabilizer that protects light-sensitive colorants, fragrances, and actives from photolytic degradation. It reduces the viscosity loss of acrylate-based gels and inhibits light-induced yellowing. Tinogard® TL is non-ionic, oil- and alcohol-soluble, and can be easily incorporated into oil- or aqua-based systems. It usually needs to be pre-mixed with a fragrance, emollient, non-ionic surfactant, or solubilizer.

Pluronic® 17R2 is a 100% active product and is suitable for use as a foam controlling agent in machine floor cleaning applications, such as in food and beverage processing, institutional cleaning, and sanitation. Its benefits include foam control, lubrication, and low foam detergency.