Products

Glucopon® 425 N is a mid-chain APG surfactant with moderate hydrotrope ability and high foam with good primary cleaning properties that is 100% derived from renewable resources. It has excellent gloss retention, low to no streaking, and excellent plastic compatibility, and won't damage even floor finishes. Furthermore, it is stable at high alkaline conditions and is an excellent option for wetting, although a defoamer may need to be used.

Plurafac® LF 403 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Plurafac® LF 900 is a surfactant composed of 5% surfactant in a 25% solution of BDG, which provides excellent foam control and good wetting. It is listed on the EPA’s Safer Chemical Ingredients List, and its benefits include defoaming and foam control, as well as wetting and low foam properties.

Lutensol® XP 89 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is an alkyl polyethylene glycol ether based on C10-guerbet alcohol and ethylene oxide and is a clear liquid at room temperature. The numeric code in the product name indicates the general degree of ethoxylation.

Dehyquart CSP is a biodegradable cationic surfactant, ideal for vehicle polish, shine, and protection in wax-type formulations. It provides a quick and easy drying effect that can be easily observed in wind tunnel installations, making the vehicle surface more hydrophobic. It also leaves a long-lasting gloss effect on vehicles, resulting from water and spot-repelling agents.

Glucopon® 215 UP is a short-chain APG sold as a liquid of 63.5% concentration. This mid-chain APG surfactant has moderate hydrotropic ability and high foam, providing good primary cleaning. It is 100% derived from renewable resources and is used as a mild degreaser and foaming/stabilizing surfactant that won't damage even floor finishes. It has excellent gloss retention and plastic compatibility, and contains no biocide for preservation. It is listed on the EPA’s Safer Chemical Ingredients List and is approved for direct release to the environment.

Pluronic® 17R4 is a 100% active product that is ideal for use as a foam controlling agent in machine floor cleaning applications. The final choice of surfactant will depend on the specific formulation. This EO/PO-block polymer has approximately 40% EO and a cloud point of 46°C.

Good performance for cleaning and foam control. Suitable for high-temperature cleaning (greater than 60°C). The cloud point is 30°C, so it has very low foaming above that temperature, which is ideal for carpet extraction operating temperatures (typically 35 to 50°C). Listed on the EPA's Safer Chemical Ingredients List, it is a low-foaming fatty alcohol EO/PO derivative.

Dehyton® PK 45 is an amphoteric surfactant that is suitable for universal application in cosmetic and pharmaceutical surfactant preparations. When combined with anionic surfactants, synergistic effects are achieved, resulting in a dermatological improvement of the consumer product. Its application properties are comparable to those of conventional cocamidopropyl betaine types.

Lutensol® TO 5 is a nonionic surfactant with an approximate 100% active ingredient content based on a saturated iso-C13 alcohol ethoxylated with 5 moles of ethylene oxide. It is a high-performance surfactant known for its low toxicity. Lutensol® TO 5 exhibits excellent emulsification, dispersion, wetting, and compatibilizing properties, making it a versatile choice for various applications.

Dehypon® LS 24 is a low-foaming non-ionic surfactant. It is an EO/PO derivative used for detergents and cleaners in which foaming has to be kept to a minimum. It appears as a yellowish liquid, clear to slightly cloudy at room temperature.

Plurafac® LF-901 is a nonionic surfactant with low foaming properties. It is made up of predominantly unbranched fatty alcohols that are alkoxylated with both higher alkene oxides and ethylene oxide. This 100% active product provides benefits such as low foaming solutions and wetting capabilities.

Pluronic® L 61 is a 100% active product and suitable for low-temperature commercial dishwashing machines. It is a low-foaming surfactant that provides good defoaming and wetting. In addition to its use in dishwashing machines, it is also suitable for machine floor cleaning as a foam controlling agent.

Lutensol® XP 40 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is a cloudy liquid at room temperature and tends to form sediment. The numeric code in the product name indicates the general degree of ethoxylation.

Dehydol® 100 Liquid 90% is an alkyl polyethylene glycol ether made from C12–C18 alcohol and contains 9 moles of ethylene oxide. It is 90% active and available as a liquid at room temperature, with a cloud point of 80°C. Due to its wetting and emulsifying power, it's used in all kinds of household and institutional cleaners.

Plurafac® LF-224 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Pluronic® 31R1 is a 100% active product with a cloud point of 25°C. It is suitable for machine floor cleaning as an excellent foam controlling agent and provides very good defoaming properties. The final surfactant choice depends on the formulation. It is listed on EPA’s Safer Chemical Ingredients List and is suitable for institutional cleaning and sanitation as well as food and beverage processing and kitchen hygiene.

Lutensol® XL 70 is a 100% active product with very fast dynamics and excellent detergency on oily soils. It has a lower tendency to form a gel compared to longer-chain alcohol ethoxylates due to its fast-acting nature, which is attributed to its superior wetting profile.

Lutensol® AO 8 is a nonionic surfactant with approximately 100% activity, based on C13C15 oxo alcohol with 8 moles of ethylene oxide and consisting of about 67% C13 and 33% C15. It is a high-performance surfactant with low toxicity, providing excellent emulsification, dispersion, wetting, and compatibilizing properties.

Lutensol® XP 80 is a 100% active product with very fast wetting and effective cleaning. It is readily biodegradable and has a lower tendency to form gels compared to longer-chain alcohol ethoxylates. Additionally, it is listed on the EPA’s Safer Chemical Ingredients List. The final surfactant choice would be formulation-dependent.

Plurafac® SLF 180 is a low-foaming surfactant with a cloud point of 18°C and is listed on EPA’s Safer Chemical Ingredients List. It is suitable for low temperature cleaning (45°C or lower) and has very good synergy with Pluronic N3, especially when used as a rinse aid in low temperature warewash machines. Final surfactant choice will be formulation dependent.

Demelan® VPC is a thickener for acidic systems that is highly effective on mineral acids, has shown excellent primary cleaning on certain soils, and mixes into solution up to three times faster than other competitive thickeners, providing improved processing time. It is also compatible with all types of anionic, cationic, and amphoteric surfactants.

Plurafac® LF 431 offers excellent caustic stability and does not yellow when in direct contact with NaOH beads. The choice of final surfactant depends on the formulation and temperature of the cleaning process. Its essential properties include wetting, low-foaming, or even defoaming.

Lutensol® AO 7 is a nonionic surfactant, approximately 100% active, that is based on C13C15 oxo alcohol with 7 moles of ethylene oxide that consists of ca. 67% C13 and ca. 33% C15. It is a high-performance surfactant with low toxicity. It also offers great emulsification, dispersion, wetting, and compatibilizing properties.

Dehypound® M is a high-performance, sustainable non-ionic surfactant blend that offers versatility for multiple soils and applications in Home Care, I&I, and car wash cleaners. Its powerful cleaning capabilities without the use of solvents, combined with its low film and streak performance, make it an ideal choice for hard surface cleaners. Furthermore, its foam profile enables a variety of formulation options and dispensing possibilities, while also helping simplify your ingredient portfolio by eliminating the need for solvents and additional hydrotropes in your finished formulation.

Texapon® K-30 UP is an anionic surfactant that appears as a slightly yellow liquid to slightly pasty substance with a concentration of approximately 29%. It has the ability to generate a very high initial foam and does not contain any preservatives. It is commonly used in the formulation of shampoos, shower and bath preparations, and skin cleansers.

Pluronic® L62 is a 100% active, low-foaming surfactant that is suitable for use in high-temperature commercial dishwashing machines. It is listed on the EPA’s Safer Chemical Ingredients List and offers benefits such as low foaming solutions and wetting and low foam capabilities.

Inoterra™ DWE is a clear liquid of 85% concentration, which utilizes the synergy between natural alcohol ethoxylates and 2-PH surfactants. Water is present to provide better phase stability. It has a cloud point of 53°C and an HLB of 12.4. It is listed on Safer Choice, although the final surfactant choice depends on the formulation.

Plurafac® LF 400 is a surfactant composed of predominantly unbranched fatty alcohols, including higher alkene oxides and ethylene oxide. The product is a low-foaming surfactant that offers excellent performance in terms of spotting and filming and has wetting and low-foam properties.

Pluronic® N3 is a 100% active product suitable for low temperature commercial dishwashing machines. It provides excellent defoaming and wetting, with a low foaming surfactant and a cloud point of 28°C. It has very good synergy with Plurafac SLF 180 when used as a rinse aid in a low temperature dishwashing machine and is listed on EPA’s Safer Chemical Ingredients List. Final surfactant choice is formulation dependent.

Plurafac® S 505 LF is a low-foaming surfactant composed of fatty alcohol alkoxylates with a cloud point of 47°C. The final choice of surfactant depends on the formulation and cleaning process temperature. It provides excellent wetting and low foaming, making it suitable for rinse aid applications.

Lutensol® XL 40 is available as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low when compared to regular alcohol ethoxylates with the same degree of ethoxylation. It has a HLB value of 10.5 and is listed on the Safer Choice label. The final surfactant choice will be dependent on the formulation.

Lutensol® TO 89 is suitable for both manual and machine floor cleaning. The hydrophobe is based on saturated iso-C13 alcohol with moderate branching. It is an effective NP-9 replacement in commercial laundry, with a cloud point of 60°C and moderate foam. Blends of Lutensol TDA 6 and 9 provide synergistic cleaning for dirty motor oil and dust sebum stains.

Glucopon® 420 UP is 100% derived from renewable resources. It is mild to the skin and can synergistically reduce the skin irritation caused by anionic surfactants. It has excellent gloss retention, little to no streaking, and excellent plastic compatibility. This product contains no biocide for preservation and is listed on the EPA’s Safer Chemical Ingredients List.

Plurafac® LF 303 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Lutensol® A 65 N is a liquid product with a concentration of 100%, or Lutensol® TO 89 in a 90% solution. The hydrophobe is based on saturated iso-C13 alcohol with moderate branching and has a cloud point of 60°C. It offers excellent detergency and wetting power and is a moderate foamer. Additionally, it is highly compatible with other nonionic, cationic, and anionic surfactants.