Products

Lutensol® XL 70 is a 100% active product with very fast dynamics and excellent detergency on oily soils. It has a lower tendency to form a gel compared to longer-chain alcohol ethoxylates due to its fast-acting nature, which is attributed to its superior wetting profile.

Plurafac® LF-901 is a nonionic surfactant with low foaming properties. It is made up of predominantly unbranched fatty alcohols that are alkoxylated with both higher alkene oxides and ethylene oxide. This 100% active product provides benefits such as low foaming solutions and wetting capabilities.

Pluronic® 31R1 is a 100% active product with a cloud point of 25°C. It is suitable for machine floor cleaning as an excellent foam controlling agent and provides very good defoaming properties. The final surfactant choice depends on the formulation. It is listed on EPA’s Safer Chemical Ingredients List and is suitable for institutional cleaning and sanitation as well as food and beverage processing and kitchen hygiene.

Lutensol® AT 25 Powder is a C16C18 fatty alcohol ethoxylate that functions as a viscosity enhancer, allowing dispersions to exhibit high mechanical and electrolyte stability as well as a small particle size. It serves as an emulsifying agent and can be used as an additive, dispersant, or co-surfactant.

Lutensol® XP 40 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is a cloudy liquid at room temperature and tends to form sediment. The numeric code in the product name indicates the general degree of ethoxylation.

Lutensol® TO 65 is a nonionic surfactant with an approximate 100% active ingredient content based on a saturated iso-C13 alcohol ethoxylated with 6.5 moles of ethylene oxide. It is a high-performance surfactant known for its low toxicity. Lutensol® TO 65 exhibits excellent emulsification, dispersion, wetting, and compatibilizing properties, making it a versatile choice for various applications.

Glucopon® 215 UP is a short-chain APG sold as a liquid of 63.5% concentration. This mid-chain APG surfactant has moderate hydrotropic ability and high foam, providing good primary cleaning. It is 100% derived from renewable resources and is used as a mild degreaser and foaming/stabilizing surfactant that won't damage even floor finishes. It has excellent gloss retention and plastic compatibility, and contains no biocide for preservation. It is listed on the EPA’s Safer Chemical Ingredients List and is approved for direct release to the environment.

Lutensol® ON 30 is a nonionic surfactant and 100% active alkyl polyethylene glycol ether made from a saturated synthetic short-chain fatty alcohol with approximately 3 moles of ethylene oxide. It is a high-performance surfactant with low toxicity and great emulsification, dispersion, wetting, and compatibilizing properties.

Lutensol® XL 79 is an easy-to-handle wetting agent and emulsifier with a C10 guerbet alcohol alkoxylate POE (7) composition and 85% active content. It provides enhanced performance compared to IDA. This product is synthetically derived and readily degradable. Lutensol® XL 79 is suitable for various formulation types, including emulsifier concentrates, oil-in-water and water-in-oil emulsions, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, wettable granules, and wettable powders.

Lutensol® XP 80 is a 100% active product with very fast wetting and effective cleaning. It is readily biodegradable and has a lower tendency to form gels compared to longer-chain alcohol ethoxylates. Additionally, it is listed on the EPA’s Safer Chemical Ingredients List. The final surfactant choice would be formulation-dependent.

Plurafac® LF 403 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Plurafac® LF 221 is a surfactant that consists of alkoxylated, mostly unbranched fatty alcohols and higher alkene oxides, in addition to ethylene oxide. It is suitable for use in low-temperature cleaning applications, specifically those at or below 45°C. It can be easily incorporated into highly acidic cleaners.

Pluronic® L62 LF is a 100% active product that is suitable for use in both high- and low-temperature commercial dishwashing machines. The choice of the final surfactant depends on the formulation. It is listed on the EPA's Safer Chemical Ingredients List.

Dehypound® HDG is a non-ionic surfactant blend that provides excellent multi-soil heavy-duty cleaning and degreasing performance. Its compatibility with a wide variety of home care and I&I blends, nonionic, anionic, cationic (including quaternary) and amphoteric surfactants, as well as strong acids and strong alkalis, gives you great formulating flexibility and allows you to create products for a wide range of applications, from industrial to food service and many more. Dehypound® HDG offers exceptional performance, easy formulating, and new opportunities.

Lutensol® XL 100 is a synthetically derived, readily biodegradable C10 guerbet alcohol alkoxylate POE (10) with 100% active content. This product is a highly effective solubilizer and offers excellent emulsification properties. It complies with the requirements of Regulation (EC) No 648/2004 on detergents and has been tested for biodegradability and emulsifying properties according to the methods listed in Annex III.

Pluronic® L 81 is a low-foaming surfactant that is 100% active and suitable for use in low-temperature commercial dishwashing machines. It provides good defoaming and wetting properties, making it suitable for use in food service and kitchen hygiene applications. The product is listed on Safer Choice. Pluronic® L 81 is commonly used in automatic dishwashing and bottle wash applications.

Lutensol® AT 25 Flakes is a fatty alcohol ethoxylate based on C16C18 and serves as a viscosity enhancer. It is particularly useful in dispersing systems as it promotes high mechanical and electrolyte stability as well as a small particle size. It functions as an emulsifying agent and can be used as a co-surfactant and dispersant.

Dehypound® M is a high-performance, sustainable non-ionic surfactant blend that offers versatility for multiple soils and applications in Home Care, I&I, and car wash cleaners. Its powerful cleaning capabilities without the use of solvents, combined with its low film and streak performance, make it an ideal choice for hard surface cleaners. Furthermore, its foam profile enables a variety of formulation options and dispensing possibilities, while also helping simplify your ingredient portfolio by eliminating the need for solvents and additional hydrotropes in your finished formulation.

Deriphat® 160 C is an amphoteric surfactant for cleaners sold as a 30% liquid with very good foaming power in both hard and soft water. It is stable over a broad pH range, allowing it to be used in both acidic and alkaline formulations. DERIPHAT® 160 C can be combined with cationic surfactants, which are often used as bactericides for disinfectants. Additionally, it is a strong hydrotrope with excellent water solubility over a broad pH range, even when high electrolyte concentrations are present. DERIPHAT® 160 C is also compatible with other common nonionic, anionic and cationic surfactants, although it is insoluble in water in the pH range of 2.4 to 4.2. It is also listed on the EPA’s Safer Chemical Ingredients List.

Pluronic® 25R2 is a 100% active product suitable for use in low-temperature commercial dishwashing machines. It provides good defoaming and wetting properties and is heavily used in the industry as a rinse aid for low-temperature commercial dish machines. It is also suitable for machine floor cleaning as a foam controlling agent.

Pluronic® L 61 is a 100% active product and suitable for low-temperature commercial dishwashing machines. It is a low-foaming surfactant that provides good defoaming and wetting. In addition to its use in dishwashing machines, it is also suitable for machine floor cleaning as a foam controlling agent.

Dehyquart CSP is a biodegradable cationic surfactant, ideal for vehicle polish, shine, and protection in wax-type formulations. It provides a quick and easy drying effect that can be easily observed in wind tunnel installations, making the vehicle surface more hydrophobic. It also leaves a long-lasting gloss effect on vehicles, resulting from water and spot-repelling agents.

Lutensol® AO 11 is a nonionic surfactant that is approximately 100% active. It is derived from C13C15 oxo alcohol with 11 moles of ethylene oxide, consisting of approximately 67% C13 and 33% C15. This high-performance surfactant exhibits low toxicity and offers excellent emulsification, dispersion, wetting, and compatibilizing properties.

Texapon® K-30 UP is an anionic surfactant that appears as a slightly yellow liquid to slightly pasty substance with a concentration of approximately 29%. It has the ability to generate a very high initial foam and does not contain any preservatives. It is commonly used in the formulation of shampoos, shower and bath preparations, and skin cleansers.

Pluronic® F 68 PRILL is a versatile difunctional block copolymer surfactant that terminates in primary hydroxyl groups. As a nonionic surfactant, it is 100% active and has low toxicity. Pluronic® F 68 PRILL offers excellent properties for dispersing various materials, making it suitable for applications requiring emulsion stability, good particle dispersion, foaming, and associative thickening.

Lutensol® TO 7 is a nonionic surfactant with an approximate 100% active ingredient content based on a saturated iso-C13 alcohol ethoxylated with 7 moles of ethylene oxide. It is a high-performance surfactant known for its low toxicity. Lutensol® TO 7 exhibits excellent emulsification, dispersion, wetting, and compatibilizing properties, making it a versatile choice for various applications.

Lutensol® CS 6250 is a clear, colorless liquid with 100% activity that is a good solubilizer, penetrating agent, and low-foaming agent. It acts as a co-solvent or co-surfactant with a cloud point greater than 100 °C. It is a petroleum-based, non-ionic surfactant, and Lutensol® AO 7 is the main component in this category.

Lutensol® XL 40 is available as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low when compared to regular alcohol ethoxylates with the same degree of ethoxylation. It has a HLB value of 10.5 and is listed on the Safer Choice label. The final surfactant choice will be dependent on the formulation.

Lutensol® XP 89 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is an alkyl polyethylene glycol ether based on C10-guerbet alcohol and ethylene oxide and is a clear liquid at room temperature. The numeric code in the product name indicates the general degree of ethoxylation.

Sulfopon® 1216 G is a sodium coco-sulfate that has convenient handling, good storage stability and flowability, high bulk density, and good detergency. It is suited as a basic surfactant in cosmetic cleansing preparations such as shampoos, shower gels, and bath preparations.

APG® 325N is a liquid product composed of alkyl polyglycosides derived from synthetic C9-C11 fatty alcohol and dissolved in water. It is a liquid product of approximately 50% concentration and has high primary cleaning, excellent gloss retention (low to no streak) and excellent plastic compatibility.

Plurafac® SLF 180 is a low-foaming surfactant with a cloud point of 18°C and is listed on EPA’s Safer Chemical Ingredients List. It is suitable for low temperature cleaning (45°C or lower) and has very good synergy with Pluronic N3, especially when used as a rinse aid in low temperature warewash machines. Final surfactant choice will be formulation dependent.

Plurafac® LF 900 is a surfactant composed of 5% surfactant in a 25% solution of BDG, which provides excellent foam control and good wetting. It is listed on the EPA’s Safer Chemical Ingredients List, and its benefits include defoaming and foam control, as well as wetting and low foam properties.

Lutensol® A 65 N is a liquid product with a concentration of 100%, or Lutensol® TO 89 in a 90% solution. The hydrophobe is based on saturated iso-C13 alcohol with moderate branching and has a cloud point of 60°C. It offers excellent detergency and wetting power and is a moderate foamer. Additionally, it is highly compatible with other nonionic, cationic, and anionic surfactants.

Plurafac® RA 300 is a surfactant composed of fatty alcohol alkoxylates with a cloud point of 37°C. It is a low-foaming product and is listed on the EPA's Safer Chemical Ingredients List. It is suitable for use in a variety of applications, including bottle wash, rinse aid, and cleaning in place.

Pluronic® 17R4 is a 100% active product that is ideal for use as a foam controlling agent in machine floor cleaning applications. The final choice of surfactant will depend on the specific formulation. This EO/PO-block polymer has approximately 40% EO and a cloud point of 46°C.