Products

Lutensol® AO 3 is a nonionic surfactant that is approximately 100% active. It is derived from C13C15 oxo alcohol with 3 moles of ethylene oxide, consisting of approximately 67% C13 and 33% C15. This high-performance surfactant exhibits low toxicity and offers excellent emulsification, dispersion, wetting, and compatibilizing properties.

Tetronic® 1301 is a tetrafunctional block copolymer surfactant terminating in the primary groups. A nonionic surfactant that is 100% active and relatively nontoxic. It provides great emulsification, wetting, and defoaming properties. Tetronic® 1301 is used for the following formulation types: emulsifier concentrates, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, wettable powders, and oil dispersions.

Pluronic® 17R4 is a 100% active product that is ideal for use as a foam controlling agent in machine floor cleaning applications. The final choice of surfactant will depend on the specific formulation. This EO/PO-block polymer has approximately 40% EO and a cloud point of 46°C.

Lutensol® AO 8 is a nonionic surfactant with approximately 100% activity, based on C13C15 oxo alcohol with 8 moles of ethylene oxide and consisting of about 67% C13 and 33% C15. It is a high-performance surfactant with low toxicity, providing excellent emulsification, dispersion, wetting, and compatibilizing properties.

Lutensol® XL 100 is a synthetically derived, readily biodegradable C10 guerbet alcohol alkoxylate POE (10) with 100% active content. This product is a highly effective solubilizer and offers excellent emulsification properties. It complies with the requirements of Regulation (EC) No 648/2004 on detergents and has been tested for biodegradability and emulsifying properties according to the methods listed in Annex III.

Lutensol® AO 7 is a nonionic surfactant, approximately 100% active, that is based on C13C15 oxo alcohol with 7 moles of ethylene oxide that consists of ca. 67% C13 and ca. 33% C15. It is a high-performance surfactant with low toxicity. It also offers great emulsification, dispersion, wetting, and compatibilizing properties.

Plurafac® LF 431 offers excellent caustic stability and does not yellow when in direct contact with NaOH beads. The choice of final surfactant depends on the formulation and temperature of the cleaning process. Its essential properties include wetting, low-foaming, or even defoaming.

Tetronic® 904 is a tetrafunctional block copolymer surfactant with terminal primary hydroxyl groups. As a nonionic surfactant, it is 100% active and relatively nontoxic. Tetronic® 904 offers a range of beneficial properties, including wetting, emulsification, and foaming. Its versatility makes it suitable for various formulation types, such as emulsifier concentrates, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, wettable powders, and oil dispersions.

Plurafac® LF 403 is a low-foaming nonionic surfactant composed of predominantly unbranched fatty alcohols alkoxylated with higher alkene oxides and ethylene oxide. Its most important properties are wetting, low-foaming, or even defoaming, making it an excellent choice for controlling foam, particularly when used in combination with Glucopon® surfactant and Deriphat® 160 C.

Tetronic® 1107 PRILL is an amine-based tetrafunctional block copolymer surfactant terminating in primary hydroxyl groups. It is an emulsifier and a great foaming agent. Tetronic® 1107 PRILL is used for the following formulation types: emulsifier concentrates, emulsions (oil and water), suspension concentrates, suspo-emulsions, and oil dispersions.

Pluronic® 25R4 is a highly effective block copolymer surfactant with terminal secondary hydroxyl groups. It is specifically designed as an ethylene oxide and propylene oxide reverse block copolymer, providing unique properties for various applications. This surfactant acts as a dispersant, offering excellent associative thickening, dispersing, and wetting characteristics with minimal environmental impact.

Tetronic® 901 is a tetrafunctional block copolymer surfactant terminating in the primary groups. A nonionic surfactant that is 100% active and relatively nontoxic. It provides great emulsification, wetting, and defoaming properties. Tetronic® 901 is used for the following formulation types: emulsifier concentrates, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, wettable powders, and oil dispersions.

Lutensol® XL 79 is an easy-to-handle wetting agent and emulsifier with a C10 guerbet alcohol alkoxylate POE (7) composition and 85% active content. It provides enhanced performance compared to IDA. This product is synthetically derived and readily degradable. Lutensol® XL 79 is suitable for various formulation types, including emulsifier concentrates, oil-in-water and water-in-oil emulsions, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, wettable granules, and wettable powders.

Pluronic® P 65 is a difunctional block copolymer surfactant with terminal secondary hydroxyl groups. It is a nonionic surfactant that is 100% active and relatively nontoxic. This surfactant is known for its effectiveness as a dispersant and solubilizer, as well as its ability to provide wetting and high-temperature foam control.

Pluriol® E 1450 PRILL is a 100% polyethylene glycol with a molecular weight of 1450. It has low toxicity and can be used for various purposes, such as a thickener, lubricant, defoaming agent, and dispersant. It also functions as a binder. Additionally, it is classified as a nonionic surfactant.

Pluronic® P 105 is a block copolymer surfactant composed of ethylene oxide and propylene oxide. It contains 50% ethylene oxide and has a molecular weight of 6500. This surfactant is 100% active and offers a range of functions in various applications.

Pluronic® L 44 INH is a nonionic block copolymer surfactant that contains 40% ethylene oxide (EO) and propylene oxide (PO). It is a liquid surfactant with a moderate hydrophilic-lipophilic balance (HLB) of 12 and a cloud point of 42°C. Pluronic® L 44 INH offers a range of features and benefits, making it suitable for various applications.

Lutensol® A 12 N is a nonionic surfactant based on C12–C14 ethoxylated lauryl alcohol and is supplied in solid wax form. It serves as a wetting agent, emulsifier, and process aid. The product is suitable for use in various formulation types, such as suspoemulsions, suspension concentrates, and soluble liquids.

Lutensol® TO 7 is a nonionic surfactant with an approximate 100% active ingredient content based on a saturated iso-C13 alcohol ethoxylated with 7 moles of ethylene oxide. It is a high-performance surfactant known for its low toxicity. Lutensol® TO 7 exhibits excellent emulsification, dispersion, wetting, and compatibilizing properties, making it a versatile choice for various applications.

Plurafac® D 250 is a non-ionic emulsifier that is suitable for oily soils, with a cloud point of 59°C and moderate foaming properties. It belongs to the EO/PO alcohol surfactant category and functions as a good non-ionic emulsifier for oily soils.

Plurafac® LF 400 is a surfactant composed of predominantly unbranched fatty alcohols, including higher alkene oxides and ethylene oxide. The product is a low-foaming surfactant that offers excellent performance in terms of spotting and filming and has wetting and low-foam properties.

Pluronic® L 121 is a specialized ethylene oxide and propylene oxide copolymer with a low hydrophilic-lipophilic balance (HLB). It is a medium-molecular-weight emulsifier with a 10% ethylene oxide content, 100% active composition, and a molecular weight of 4400. Pluronic® L 121 is particularly suitable for formulating low-foaming water-in-oil (w/o) emulsions. It provides excellent emulsion stability and wetting properties.

Plurafac® LF 500 is a low-foaming nonionic surfactant that provides excellent foam control for Glucopon® surfactant and Deriphat® 160 C. It is mainly used for its wetting, low-foaming, or even defoaming properties. Plurafac® LF 500 finds applications in various industries, such as food and beverage processing, food service and kitchen hygiene, commercial laundry, institutional cleaning and sanitation, and industrial cleaning.

Lutensol® TO 5 is a nonionic surfactant with an approximate 100% active ingredient content based on a saturated iso-C13 alcohol ethoxylated with 5 moles of ethylene oxide. It is a high-performance surfactant known for its low toxicity. Lutensol® TO 5 exhibits excellent emulsification, dispersion, wetting, and compatibilizing properties, making it a versatile choice for various applications.

Pluronic® P 103 is a difunctional block copolymer surfactant that terminates in primary hydroxyl groups. It is a nonionic surfactant known for being 100% active and relatively nontoxic. Pluronic® P 103 exhibits excellent properties in terms of oil-in-water (o/w) emulsification and wetting. It finds application in various formulation types, including capsule suspensions, emulsion concentrates, emulsions (oil and water), microemulsions, suspension concentrates, suspo-emulsions, wettable granules, and oil dispersions.

Pluronic® F 77 PRILL is a versatile difunctional block copolymer surfactant that terminates in primary hydroxyl groups. It is a nonionic surfactant known for its 100% active composition and low toxicity. Pluronic® F 77 PRILL exhibits excellent foaming properties and acts as an effective associative thickener.

Sokalan® K 90 P is a vinylpyrrolidone homopolymer that serves as a binder in various applications. It is a nonionic polymer with a very high molecular weight, characterized by a high glass transition temperature and a larger particle size. This polymer functions as both a binder and a stabilizer, providing effective binding properties and stability to formulated products.

Pluronic® F 98 PRILL is a highly versatile difunctional block copolymer surfactant that terminates in primary hydroxyl groups. It is a nonionic surfactant known for its 100% active composition and low toxicity. Pluronic® F 98 PRILL exhibits excellent foaming properties and acts as an effective associative thickener.

Lutensol® AO 11 is a nonionic surfactant that is approximately 100% active. It is derived from C13C15 oxo alcohol with 11 moles of ethylene oxide, consisting of approximately 67% C13 and 33% C15. This high-performance surfactant exhibits low toxicity and offers excellent emulsification, dispersion, wetting, and compatibilizing properties.

Pluronic® F 127 PRILL is a highly versatile EO/PO block copolymer surfactant with an 80% EO (ethylene oxide) content. With a molecular weight of 8400, it is a difunctional surfactant that terminates in primary hydroxyl groups. This nonionic surfactant is 100% active and has a relatively low toxicity profile.

Sokalan® K 17 P is a nonionic vinylpyrrolidone homopolymer with a high activity level of 95% and a molecular weight of 9000. It offers several advantageous properties, including low viscosity, small particle size, and a low glass transition temperature. These characteristics make it well suited for seed coating and seed treatment applications. Additionally, it also functions as a moisture aid, process aid, and stabilizer.

Pluriol® E 1000 LS is a 100% polyethylene glycol with a molecular weight of 1,000. It is commonly used as a thickening agent, suspending agent, and binder. When esterified with fatty acids, it can also function as an emulsifying agent.

Pluronic® P 104 is an ethylene oxide and propylene oxide copolymer surfactant. It contains 40% ethylene oxide and has a molecular weight of 5900. This block copolymer surfactant is 100% active and offers a wide range of functions in various applications.

Pluriol® E 8000 E is a highly versatile 100% polyethylene glycol with a molecular weight of 8,000. This compound serves as an excellent binder and offers various functions in different applications, including its use as a thickener, lubricant, defoaming agent, and dispersant.

Pluronic® F 108 PRILL is a solid EO/PO block copolymer surfactant with a high EO (ethylene oxide) content of 80%. This versatile surfactant offers a range of features and benefits, including its solid form, high HLB (hydrophilic-lipophilic balance) value of 27, and a cloud point exceeding 100°C. With its unique properties, Pluronic® F 108 PRILL finds applications in various industries.

Lutensol® ON 30 is a nonionic surfactant and 100% active alkyl polyethylene glycol ether made from a saturated synthetic short-chain fatty alcohol with approximately 3 moles of ethylene oxide. It is a high-performance surfactant with low toxicity and great emulsification, dispersion, wetting, and compatibilizing properties.